Gentlemen,
That worked! Thank you so very much for all your assistance! It
is greatly appreciated!
John,
Thank you for the additional information.
Thank You,
Johnny Espinosa
Sr. Lead Network Engineer
Boston Market Corporation
14103 Denver West Parkway
Golden, CO 80401
Office: 303.216.5393
Cell: 720.271.6480
Email: [email protected]
From: John York <[email protected]>
To: 'mrtg' <[email protected]>, "'[email protected]'"
<[email protected]>
Date: 09/30/2011 01:17 PM
Subject: RE: [mrtg] Assistance
Oh, I also had a problem with event logging. It's probably been fixed by
now, but it caused me to make these changes:
There is an error in the MRTG code somewhere regarding logging to the
Windows Event Log, which caused MRTG errors when I tried to run it.
Changed my command line for testing to this:
perl c:\mrtg\bin\mrtg --logging=c:\mrtg\bin\log\log.txt
c:\mrtg\bin\mrtg.cfg".
(replaced logging=eventlog with logging=path) and it ran. Also had to
change the registry from that listed in the procedure to this:
"AppParameters"="c:\\mrtg\\bin\\mrtg --logging= c:\\mrtg\\log\\log.txt
c:\\mrtg-2.17.1\\bin\\mrtg.cfg"
-----Original Message-----
From: John York
Sent: Friday, September 30, 2011 3:13 PM
To: mrtg; '[email protected]'
Subject: RE: [mrtg] Assistance
See the section, HOW TO SETUP MRTG AS A WINDOWS SERVICE, in
http://oss.oetiker.ch/mrtg/doc/mrtg-nt-guide.en.html. I've used it for
years and it works great. The "run as daemon" is confusing for windows,
since you also have to create a service as described above.
John
-----Original Message-----
From: [email protected] [
mailto:[email protected]] On Behalf Of Daniel
McDonald
Sent: Friday, September 30, 2011 3:08 PM
To: [email protected]
Cc: mrtg; [email protected]
Subject: Re: [mrtg] Assistance
On 9/30/11 11:51 AM, "[email protected]" <[email protected]> wrote:
> Daniel,
> Thank you for getting back to me so quickly. I believe it is
running
> as a Daemon but I can't tell for sure? I opened up Task Manager on the
server
> that it is "supposedly" running on and I could not locate anything in
there
> related to MRTG.
Ah, you are running on Windows. Hopefully someone else on this list
understands windows servers - I haven't managed a windows server this
millennium...
But I recall there were a couple of daemon tools used to run mrtg -
fireDaemon was popular about 8 years ago. But I don't know much more
about
it than a name..
> I guess, we could start with how would I verify that it is
> even running if I can't locate anything within Task Manager or in the
Services
> tab?
--
Daniel J McDonald, CCIE # 2495, CISSP # 78281
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
