Yesterday Christian Arnaut wrote: > Have what could be a simple question. When monitoring an SNMP device w/MRTG, > is it possible to plot the data from two devices on a single graph? > > > > I have two temperature probes. I would like probe #1 (indoor temp) displayed > as the I value and probe #2 (outdoor temperature) as the O value. > > > > Currently I am monitoring the indoor temp with the noo option enabled. > > Target[ncr-temp]: > 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0&1.3.6.1.4.1.3854.1.2.2.1.16.1.8.0:public@1 > 0.44.1.60 > > > > I also have a second temp probe (also noo option) on a different IP address > measuring outdoor temperature. > > Target[outdoor-temp]: > 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0&1.3.6.1.4.1.3854.1.2.2.1.16.1.8.0:public@1 > 0.1.1.60 > > > > Would love to modify the syntax of the Target line in the cfg file to > support polling the I & O values from different devices. > > Something like below, but this doesn't seem to work. > > > > 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0:[email protected]&1.3.6.1.4.1.3854.1.2.2.1 > .16.1.3.0:[email protected] > >
Target[temp]: PseudoZero&1.3.6.1.4.1.3854.1.2.2.1.16.1.8.0:[email protected] + 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0&PseudoZero:[email protected] should do the trick cheers tobi > > > > Thank you, in advance, for any assistance. I have search the forums and > found that others have asked the same fundamental, however the links to the > solutions are dead links. > > > > > > ~Christian > > > > -- Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland http://it.oetiker.ch [email protected] ++41 62 775 9902 / sb: -9900 _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
