The PseudoZero solution worked perfectly!
Thank you, ~Christian -----Original Message----- From: Tobias Oetiker [mailto:[email protected]] Sent: Friday, May 10, 2013 1:47 AM To: Christian Arnaut Cc: [email protected] Subject: Re: [mrtg] Two devices, one graph? Yesterday Christian Arnaut wrote: > Have what could be a simple question. When monitoring an SNMP device > w/MRTG, is it possible to plot the data from two devices on a single graph? > > > > I have two temperature probes. I would like probe #1 (indoor temp) > displayed as the I value and probe #2 (outdoor temperature) as the O value. > > > > Currently I am monitoring the indoor temp with the noo option enabled. > > Target[ncr-temp]: > 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0&1.3.6.1.4.1.3854.1.2.2.1.16.1.8.0:pu > blic@1 > 0.44.1.60 > > > > I also have a second temp probe (also noo option) on a different IP > address measuring outdoor temperature. > > Target[outdoor-temp]: > 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0&1.3.6.1.4.1.3854.1.2.2.1.16.1.8.0:pu > blic@1 > 0.1.1.60 > > > > Would love to modify the syntax of the Target line in the cfg file to > support polling the I & O values from different devices. > > Something like below, but this doesn't seem to work. > > > > 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0:[email protected]&1.3.6.1.4.1.3854.1 > .2.2.1 > .16.1.3.0:[email protected] > > Target[temp]: PseudoZero&1.3.6.1.4.1.3854.1.2.2.1.16.1.8.0:[email protected] + 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0&PseudoZero:[email protected] should do the trick cheers tobi > > > > Thank you, in advance, for any assistance. I have search the forums > and found that others have asked the same fundamental, however the > links to the solutions are dead links. > > > > > > ~Christian > > > > -- Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland http://it.oetiker.ch [email protected] ++41 62 775 9902 / sb: -9900 _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
