Need some help. Configuring MRTG for the first time. Have MRTG (v2.17.4) installed on a Windows 2012 Server with ActivePerl (v5.20.2) and Net-SNMP (v5.5.0). I used cfgmaker for a base config file and added all my routers. I am able to capture data from all but the ones that require SNMPv3.
I am running the following command: E:\mrtg-2.17.4\bin>perl cfgmaker --global "WorkDir: e:\mrtg" --output mrtg.cfg --enablesnmpv3 --username=AdminUser --authpassword=authpassword --authproto=sha --privpassword=privpassword --privprotocol=aes --snmp-options=:::::3 --contextengineid=0 [email protected] I get the following error: WARNING: SNMP V3 libraries not found, SNMP V3 disabled. Falling back to V2c. reverting to snmpV2c for router [email protected]:::::3<mailto:[email protected]:::::3> I tested this on a Linux server (RHEL7) as well and get the same error. Rodger Rau Senior Network Engineer, Information Management T: 631 812-6181 | F: 631 812-6330 Leviton Manufacturing Co., Inc. 201 North Service Road., Melville, NY 11747 www.leviton.com | [email protected] Stay Connected with FREE Leviton Mobile Apps: www.leviton.com/apps
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
