You probably also need perl-Crypt-Rijndael, if you are using AES privacy credentials.
From: mrtg <[email protected]<mailto:[email protected]>> on behalf of "Wm. Josiah Erikson" <[email protected]<mailto:[email protected]>> Date: Wednesday, September 23, 2015 at 9:35 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [mrtg] MRTG and SNMPv3 Rodger, Either enable the CentOS Base Repo ( edit /etc/yum.repos.d/CentOS-Base.repo and enable it), where that package lives, or download and install it manually from here (or any number of other rpmfind-like services): http://rpm.pbone.net/index.php3/stat/4/idpl/29075690/dir/centos_7/com/perl-Crypt-DES-2.05-20.el7.x86_64.rpm.html -Josiah On 9/23/15 10:08 AM, Rau, Rodger wrote: I did do that..however, I get the following error: Error: Package: perl-Net-SNMP-6.0.1-7.e17.noarch (epel) Requires: perl (Crypt::DES) You could try using –skip-broken to work around the problem You could try running: rpm –Va –nofiles –nodigest Then I try: #yum install perl-Crypt-DES No package available Rodger Rau Senior Network Engineer, Information Management T: 631 812-6181 | F: 631 812-6330 Leviton Manufacturing Co., Inc. www.leviton.com<http://www.leviton.com>| [email protected]<mailto:[email protected]> From: mrtg [mailto:[email protected]] On Behalf Of Wm. Josiah Erikson Sent: Wednesday, September 23, 2015 9:52 AM To: [email protected]<mailto:[email protected]> Subject: Re: [mrtg] MRTG and SNMPv3 Well, you have to install the SNMP v3 libraries. I don't know about Windows, but on RHEL 7 it should be as simple as "yum install net-snmp-perl", I think. -Josiah On 9/23/15 9:38 AM, Rau, Rodger wrote: Need some help. Configuring MRTG for the first time. Have MRTG (v2.17.4) installed on a Windows 2012 Server with ActivePerl (v5.20.2) and Net-SNMP (v5.5.0). I used cfgmaker for a base config file and added all my routers. I am able to capture data from all but the ones that require SNMPv3. I am running the following command: E:\mrtg-2.17.4\bin>perl cfgmaker --global "WorkDir: e:\mrtg" --output mrtg.cfg --enablesnmpv3 --username=AdminUser --authpassword=authpassword --authproto=sha --privpassword=privpassword --privprotocol=aes --snmp-options=:::::3 --contextengineid=0 [email protected]<mailto:[email protected]> I get the following error: WARNING: SNMP V3 libraries not found, SNMP V3 disabled. Falling back to V2c. reverting to snmpV2c for router [email protected]:::::3<mailto:[email protected]:::::3> I tested this on a Linux server (RHEL7) as well and get the same error. Rodger Rau Senior Network Engineer, Information Management T: 631 812-6181 | F: 631 812-6330 Leviton Manufacturing Co., Inc. 201 North Service Road., Melville, NY 11747 www.leviton.com<http://www.leviton.com> | [email protected]<mailto:[email protected]> Stay Connected with FREE Leviton Mobile Apps: <http://www.leviton.com/apps> www.leviton.com/apps<http://www.leviton.com/apps> _______________________________________________ mrtg mailing list [email protected]<mailto:[email protected]> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg -- Wm. Josiah Erikson Assistant Director of IT, Infrastructure Group System Administrator, School of CS Hampshire College Amherst, MA 01002 (413) 559-6091 -- Wm. Josiah Erikson Assistant Director of IT, Infrastructure Group System Administrator, School of CS Hampshire College Amherst, MA 01002 (413) 559-6091
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
