Hi, It is probably due to certificate problems. Your servers are in a DMZ and I will say no trusts are in place.
You will probably need to generate a CA cert and an OpsMgr Cert for the DMZ machines before they appear in the pending list. Take a look at http://blogs.technet.com/b/stefan_stranger/archive/2012/04/17/monitoring-non-domain-members-with-om-2012.aspx Peter Hakesley | Monitoring & Automation Technical Lead Engineer, Data Centre Services t: +44(0)845 155 6556 ext: 4006 e: [email protected] | w: www.scc.com<http://www.scc.com/> a: SCC, CV1, Cole Valley, 20 Westwood Avenue, Tyseley, Birmingham B11 3RZ From: [email protected] [mailto:[email protected]] On Behalf Of Dinh, Khoi Sent: 31 March 2015 17:50 To: MyITForum ([email protected]) Subject: [msmom] What ports to open for external DMZ servers ? Greetings, We have SCOM 2012 R2, there is a requirement to monitor the servers on the external DMZ ... the network team open up the port 5723 strictly just for the MOM servers, it is a manual install agent on the target servers but we don't see them in Pending Management queue for approval, so did the basic RPC test and failed per screenshot... Is RPC running on the same port 5723 or need to allow separately? Is there a link that describes what are all the ports/anything else that need to be open up/setup to make this work? Thank you in advance .... [cid:[email protected]] ________________________________ *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person.
