All, Apologies we have found the issue. It is in fact NetBackup daemon: restarted all working now.
Peter Hakesley | Monitoring & Automation Technical Lead Engineer, Data Centre Services t: +44(0)845 155 6556 ext: 4006 e: [email protected] | w: www.scc.com<http://www.scc.com/> a: SCC, CV1, Cole Valley, 20 Westwood Avenue, Tyseley, Birmingham B11 3RZ From: [email protected] [mailto:[email protected]] On Behalf Of Pete Hakesley Sent: 13/February/2017 10:08 To: [email protected] Subject: [msmom] SNMP Trap Monitoring All, Been using Kevin Holman's excellent guide(s) and have been using the https://blogs.technet.microsoft.com/kevinholman/2015/02/03/snmp-trap-monitoring-with-scom-2012-r2/ guide to setup SNMP monitoring for Traps. Outline. 1. Receive Traps from NetBackup 7.7.3 into SCOM as the NetBackup Mgt Pack for 2007 Does not work as it uses the Network Device Legacy Class and not the correct Node class - requires a rewrite which is outside of my skills level. 2. The NetBackup Operations Center server is a Windows 2008 R2 Server and I have added it to SCXOM 2012 R2 as a Network Device using this article https://social.technet.microsoft.com/wiki/contents/articles/23549.how-to-discover-windows-computers-using-snmp-via-scom.aspx 3. I have used Wireshark to detect and ensure that Traps are being received and I can see the SNMP-v2 traps hitting the interface on the SCOM Management Server. 4. The traps do not appear in the Node- capture filter in SCOM? I think the problem is around the Windows Box Network Devices discovery and class (Node) but I cannot be sure any help would be appreciated. Peter Hakesley | Monitoring & Automation Technical Lead Engineer, Data Centre Services t: +44(0)845 155 6556 ext: 4006 e: [email protected]<mailto:[email protected]> | w: www.scc.com<http://www.scc.com/> a: SCC, CV1, Cole Valley, 20 Westwood Avenue, Tyseley, Birmingham B11 3RZ
