What is the host platform?

Ben.

> On 4 Mar 2020, at 1:30 am, Andre van Eyssen <[email protected]> wrote:
> 
> Hi all,
> 
> I'm having some .. troubles .. with Fibre Channel COMSTAR on 11.4.
> 
> The qlt driver attaches, but fcinfo hba-port shows the port as dead:
> 
>       Type: unknown
>         State: offline
> 
> and there's either no light on the port, or a residual login from the BIOS 
> but nothing from Solaris.
> 
> I've tried QLE2462 and QLE2562, old and latest firmware. Tried current 
> drivers, tried pulling across old drivers and firmware from 11.3 (which 
> I've had working with FC COMSTAR). Pretty much the same result -- the 
> driver attaches but doesn't bother trying to talk to the fabric.
> 
> Switching back to the qlc (initiator) driver has a clean login to the 
> fabric and hba-info showing the correct state.
> 
> Log noise (debug turned on): 
> https://urldefense.com/v3/__http://mexico.purplecow.org/p/index.php?c__;!!GqivPVa7Brio!Iq-5Lh_MDUpGUXTyBJXT7x-PM-LIKdfMg-T7V6wMCni6cMLltwc5q6l_xO_3qtGrRQ$
>  
> 
> fcinfo (avoid the fnords): 
> https://urldefense.com/v3/__http://mexico.purplecow.org/p/index.php?i__;!!GqivPVa7Brio!Iq-5Lh_MDUpGUXTyBJXT7x-PM-LIKdfMg-T7V6wMCni6cMLltwc5q6l_xO-uY48BaQ$
>  
> 
> Cards tried:
>       QLE2462, vintage firmware
>       QLE2462, current firmware
>       QLE2562, HP edition
>       QLE2562, Dell edition
>       QLE2562, QLogic edition, old firmware
>       QLE2562, QLogic edition, current firmware
> 
> 
> 
> 
> -- 
> Andre van Eyssen.                  Phone:    +61 417 211 788
> mail:     [email protected]
> 
> _______________________________________________
> msosug mailing list
> [email protected]
> https://urldefense.com/v3/__http://mexico.purplecow.org/m/listinfo/msosug__;!!GqivPVa7Brio!Iq-5Lh_MDUpGUXTyBJXT7x-PM-LIKdfMg-T7V6wMCni6cMLltwc5q6l_xO_ZL2yTtw$
>  
> Delivered for: [email protected]


_______________________________________________
msosug mailing list
[email protected]
http://mexico.purplecow.org/m/listinfo/msosug
Delivered for: [email protected]

Reply via email to