I think it was with an Olimex firmware for the UIF that I've tried ? I can't remember. Anyway, try and see if this helps; if not, perhaps there's a problem with your FET ? --- On Thu, 9/23/10, Peter Bigot <[email protected]> wrote:
> From: Peter Bigot <[email protected]> > Subject: Re: [Mspgcc-users] mspdebug and f5438 erase problem > To: "GCC for MSP430 - http://mspgcc.sf.net"; > <[email protected]> > Date: Thursday, September 23, 2010, 2:00 AM > No go. Previous attempt was > with: > > FET protocol version is 20404000 > > Just downloaded the latest Code Composer Studio and updated > the FET firmware > now to: > > FET protocol version is 20405003 > > Same behavior. FWIW, I've never seen a FET version > 20305000; where did you > get it? > > If it matters, I do know the EXP430F5438 has a 5438 on it, > not a 5438A. Now > that I've dug up an old PC with a Windows XP license I was > able to snare > some sniffusb output which I've forwarded to Daniel in > hopes he can help. > > Once either that problem is fixed, or support for the > FG4618 is added > (another board I have), I'll at least have hardware that > supports more than > 64KB of memory. Doesn't fix the time availability > issue, unfortunately. > > Peter > > On Wed, Sep 22, 2010 at 2:02 AM, Mihai Galos <[email protected]> > wrote: > > > Peter, > > > > I cannot reproduce your bug. Here is my output: > > > > $ mspdebug uif -j -d /dev/ttyS3 > > Trying to open UIF on /dev/ttyS3... > > Initializing FET... > > FET protocol version is 20305000 > > Configured for JTAG (2) > > Sending initial reset... > > Set Vcc: 3000 mV > > Device ID: 0x5438 > > Device: MSP430F5438 > > Code memory starts at 0x5c00 > > Number of breakpoints: 8 > > > > Available commands: > > = > dis > hexout opt > reset step > > break erase > isearch prog > run sym > > cgraph gdb > md read > set > > delbreak help > mw regs > setbreak > > > > Available options: > > color > gdb_loop quiet > > > > Type "help <topic>" for more information. > > Press Ctrl+D to quit. > > > > (mspdebug) erase > > Erasing... > > (mspdebug) > > > ----------------------------------------------------------------------- > > > > Meaning mspdebug is responsive after the erase. > Perhaps you need to update > > the fet firmware? I can't remember the last one I > installed :(( > > > > Mihai > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > Start uncovering the many advantages of virtual > appliances > > and start using them to simplify application > deployment and > > accelerate your shift to cloud computing. > > http://p.sf.net/sfu/novell-sfdev2dev > > _______________________________________________ > > Mspgcc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/mspgcc-users > > > > -----Inline Attachment Follows----- > > ------------------------------------------------------------------------------ > Start uncovering the many advantages of virtual appliances > and start using them to simplify application deployment > and > accelerate your shift to cloud computing. > http://p.sf.net/sfu/novell-sfdev2dev > -----Inline Attachment Follows----- > > _______________________________________________ > Mspgcc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/mspgcc-users > ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Mspgcc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mspgcc-users
