Thanks; the patch you sent me fixes the problem on the 5438.
No go on the FG4618. In fact, the mainline mspdebug doesn't seem to have
any mention of that chip, and the -id command isn't supported. Is git://
mspdebug.git.sourceforge.net/gitroot/mspdebug/mspdebug still the repository
to track?
Peter
On Wed, Sep 22, 2010 at 9:25 PM, Daniel Beer <[email protected]> wrote:
> On Wed, Sep 22, 2010 at 07:00:09PM -0500, Peter Bigot wrote:
> > No go. Previous attempt was with:
> >
> > FET protocol version is 20404000
> >
> > Just downloaded the latest Code Composer Studio and updated the FET
> firmware
> > now to:
> >
> > FET protocol version is 20405003
> >
> > Same behavior. FWIW, I've never seen a FET version 20305000; where did
> you
> > get it?
> >
> > If it matters, I do know the EXP430F5438 has a 5438 on it, not a 5438A.
> Now
> > that I've dug up an old PC with a Windows XP license I was able to snare
> > some sniffusb output which I've forwarded to Daniel in hopes he can help.
> >
> > Once either that problem is fixed, or support for the FG4618 is added
> > (another board I have), I'll at least have hardware that supports more
> than
> > 64KB of memory. Doesn't fix the time availability issue, unfortunately.
>
> Hi Peter,
>
> Sorry for the late reply -- I've been out of town the past week.
>
> Anyway, I'll take a look at the sniffusb output you've sent and see
> what I can put together. I have an FG4618 which was working as at
> version 0.8, but I've just tried it again and apparently I've broken
> something.
>
> However, I did manage to get it working with:
>
> dlb...@euler:~$ ./mspdebug --no-reset -jd /dev/ttyUSB0 uif
> Trying to open UIF on /dev/ttyUSB0...
> Initializing FET...
> FET protocol version is 20107000
> Configured for JTAG (2)
> Set Vcc: 3000 mV
> Device: MSP430FG461x
> Code memory starts at 0x3100
> Number of breakpoints: 8
>
> Perhaps I need to do something about the default start-up behaviour.
> The initial reset is required in some cases, but creates problems in
> other cases.
>
> Cheers,
> Daniel
>
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
Mspgcc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mspgcc-users
