In a similar vain, I was trying to develop on a F42x0 with the TI CCE package a bit ago, and it doesn't seem to work that well, either- I was having luck getting it to prgoram through all TI-stuff, but only with power cycles between each attempt, and the debugger itself kept halting and crashing after a halt- The 42x0 wasn't totally reliable with TI's tools as of about a month ago.
Cheers, Greg Linder On 10/21/05, Ben Andrack <b...@inotec-feg.de> wrote: > Hi Chris, > thanks for your response! > > > The 2x series is not yet supported in msp430-jtag. Their JTAG interfaces > > has some small changes, but the application note describing flash > > programming has not yet been updated. as msp430-jtag is completly open > > source, i have to wait for the information to be publicly available. > > That aren't good news, but at least I don't have to try further. > Do you have any information, when the app note will be available? > > > as John sugested, the latest gdbproxy is able to program them in the > > meantime. > > Is it? I downloaded the (hopefully) latest version (March/3 2003) from: > http://prdownloads.sourceforge.net/mspgcc > I still get the error: Could not read device memory > Is that the latest version? > > Are there other tools for downloading to flash? > > > Best regards, > Ben > > > ------------------------------------------------------- > This SF.Net email is sponsored by: > Power Architecture Resource Center: Free content, downloads, discussions, > and more. http://solutions.newsforge.com/ibmarch.tmpl > _______________________________________________ > Mspgcc-users mailing list > Mspgcc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mspgcc-users >
