On Nov 26, 2007 9:29 AM, Steve Underwood <[email protected]> wrote: > > Andy Warner wrote: > > On Nov 26, 2007 9:01 AM, Steve Underwood <[email protected]> wrote: > > > >> [...] > >> msp430-gdbproxy msp430 --update-usb-fet <device name> > >> > > > > Doesn't seem to work for all cases. See my recent posting(s) > > for one example where --update-usb-fet continues to fail in > > the same manner. I still have not figured that one out. > > Suggestions on how to debug a problem with msp430-gdbproxy > > are welcome, because it's dead in the water for me. > > > I believe if you are using the DLL from Olimex, that it should obey the > instruction to update the tool. The actual code to be downloaded to a TI > USB FET tool is embedded in their DLL, and the DLL interface has an > "update the USB FET tool" instruction. Olimex should be compatible with > that. Are you sure msp430-gdbproxy has picked up the correct DLL from > Olimex?
The problem I refer to (1) happens under Fedora 7 with a stock TI -UIF, so Olimex/DLL issues should not be involved. I just wanted to point out that there is at least one problem out there that looks like an upgrade is required, but is in fact deeper than that. I'm eager to do whatever I can to help debug the problem, but don't know where to start beyond strace - I haven't even been able to locate a buildable version of msp430-gdbproxy that I can experiment with. (1)http://sourceforge.net/mailarchive/forum.php?thread_name=19106af40711082007l588b8aaep8ff7a7bd38ee12b5%40mail.gmail.com&forum_name=mspgcc-users -- Andy
