On 2007-12-14, Steve Underwood <[email protected]> wrote:

>>>>> Has anybody worked with the MSP430F2410 yet?
>>>>>         
>>>> If you are using Windows its OK.
>>>>       
>>> Is that true for 2330 as well?
>>>     
>>
>> Apparently not for any value of "using Windows" that I can come
>> up with.
>>
>> I installed IAR kickstart and verified that its debugger can
>> talk to the 2330 (I can download and run the LED flashing demo
>> program).  When I run msp430-gdbproxy using the msp430.dll and
>> hil.dll files from the IAR install I still get this:
>>
>>    notice:    msp430: TI USB FET self-test requested
>>    debug: MSP430_Initialize()
>>    debug: MSP430_FET_SelfTest()
>>    notice:    msp430: Self test passed
>>    debug: MSP430_Initialize()
>>    debug: MSP430_Configure()
>>    debug: MSP430_VCC(3000)
>>    debug: MSP430_Identify()
>>    error:     msp430: Could not find device (or device not supported) (4)
>>    debug: MSP430_VCC(0)
>>    debug: MSP430_VCC(3000)
>>    debug: MSP430_Reset(ALL_RESETS)
>>    debug: MSP430_Close()
>>    Assertion failed: !msp430_status.is_open, file target_msp430.c, line 745
>>    
>>    This application has requested the Runtime to terminate it in an unusual 
>> way.
>>    Please contact the application's support team for more information.
>>
>> Since the DLL files appear to work with the IAR debugger is it
>> safe to assume that they're up-to-date enough?and that it's
>> msp430-gdbproxy itself that needs to be udpated?  
>>
>> What does it take to add a new device type to msp430-gdbproxy?
>>
>> Is there anything I can do to help?
>
> Any available device should work with
>
> http://www.soft-switch.org/downloads/mspgcc/MSP430.dll

Using msp430.dll and msp430-gdbproxy.exe from the above link, I
get the output shown above (same results with IAR's msp430.dll
and soft-switch's msp430.dll).

If I also replace the IAR HIL.dll with the soft-switch one I
then get this instead:

  "msp430: Could not initialize device interface"

I'm using an MSP-FED430UIF USB interface (the gray plastic box
about the size of a deck of bridge cards).

Is it possible to use the IAR debugger to debug a GCC .elf
file?

-- 
Grant Edwards                   grante             Yow! Eisenhower!!  Your
                                  at               mimeograph machine upsets
                               visi.com            my stomach!!


Reply via email to