Hi Daniel, Any chance you could make it work with FET firmware version 20401004? That's the one I've found to work with a variety of tools enabling me to program the bigger 2xx series and I'm reluctant to risk breaking my FET, but it would be very convenient to be able to use mspdebug for flashing on Linux. Currently, I'm getting the following output:
$ ./mspdebug -j -u /dev/ttyUSB0 MSPDebug version 0.7 - debugging tool for MSP430 MCUs Copyright (C) 2009, 2010 Daniel Beer <[email protected]> This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Trying to open UIF on /dev/ttyUSB0... FET protocol version is 20401004 Configured for JTAG Set Vcc: 3000 mV fet: FET returned error code 4 (Could not find device (or device not supported)) fet: command 0x28 failed fet: identify failed Michiel > -----Original Message----- > From: [email protected] [mailto:[email protected]] > Sent: dinsdag 11 mei 2010 3:11 > To: [email protected] > Subject: [Mspgcc-users] MSPDebug version 0.7 > > Hi all, > > MSPDebug version 0.7 is now available from: > > http://homepages.xnet.co.nz/~dlbeer/download.html > > It now supports the TI Chronos devices, and some newer versions of the > FET430UIF firmware (>= 20404000). Thanks to Doug Forman for testing and > analysis work which enabled this. > > New features have been added which aid in reverse-engineering of MSP430 > binaries, such as symbol table editing and export, and instruction > search. > > As always, I welcome any feedback, bug reports, feature requests and so > on. > > Regards, > Daniel > > ----------------------------------------------------------------------- > ------- > > _______________________________________________ > Mspgcc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/mspgcc-users
