> -----Original Message----- > From: [email protected] [mailto:[email protected]] > Sent: woensdag 12 mei 2010 0:08 > To: Michiel Konstapel > Cc: GCC for MSP430 - http://mspgcc.sf.net > Subject: RE: [Mspgcc-users] MSPDebug version 0.7 > > Michiel Konstapel writes: > > > My main problem is that I don't have firmware version 20401004 on > my > > > FET, and I don't know what software will upgrade/use this firmware > > > version. Anyone have any suggestions? > > > > I'm not sure if these DLLs will make it through the mail filters, but > > these are the ones I used to flash that firmware version into my FET > > using mspgdbproxy. Olimex's MSP430 Flash Programmer > > (http://www.olimex.com/dev/soft/msp430/MSPProg-1202.zip) works as well, > > but I've only managed either method under Windows. Anyway, I wouldn't > > ask you to risk bricking your FET, but I thought I'd at least let you > > know :) > > Great, thanks. So, with the Olimex flash programmer, you can upgrade > the FET and then program an MSP with it?
Yup - just replace its DLLs with the ones with the correct version of the firmware. It'll also read back the version from the device. I'm not sure, but I don't think I managed to program all devices with it. Elprotronic's free version of FET-Pro430 did work. Sometimes I think I should just use the BSL for everything... ;) Michiel
