Hi again! I've installed Ubuntu 11.04 and started with mspgcc from the beginning. I had to gather some additional packages except of those mentioned in the Sergio's README, so it took some time. But, by and large, everything went fine and now I can program and debug LaunchPad with mspdebug. So thank you all for your guidance!
But which other debugging tools can you advice to work with MSP430s? Is it hard to tie MSPGCC to Eclipse, for instance, or any other IDE (free limited versions of IAR or CCS)? Best regards, Glib Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. Vorsitzender des Aufsichtsrates: Edgar Frank -----Original Message----- From: Dovgych, Glib Sent: Tuesday, June 28, 2011 9:14 AM To: Hans Nieuwenhuis; mspgcc-users@lists.sourceforge.net Subject: Re: [Mspgcc-users] FW: MSPGCC Uniarch installation instructions Thank you all guys for your replies! As I'm not sure where else I've screwed up, I decided to make a back-up of my system and install a fresh one. And then I'll start all over again. Thanks again! Best regards, Glib Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. Vorsitzender des Aufsichtsrates: Edgar Frank ________________________________________ From: Hans Nieuwenhuis [vz...@xs4all.nl] Sent: Tuesday, June 28, 2011 9:07 AM To: mspgcc-users@lists.sourceforge.net Subject: Re: [Mspgcc-users] FW: MSPGCC Uniarch installation instructions Hi Glib, If you install gcc through apt-get it should always go into /usr prefix. Looking at one of your previous emails I see all kinds of references to /usr/local prefix. You might have a botched instance of gcc around. Do you have a /usr/local/bin/gcc as wel as a /usr/bin/gcc? If you have both try to remove /usr/local/bin/gcc. The gcc install in /usr should be find as you installed that one last. Kind regards, Hans On Mon, 27 Jun 2011 17:12:50 +0200 "Dovgych, Glib" <g-dovg...@ti.com> wrote: > Hmm, I get exactly the same error as before. > But I've reinstalled gcc and binutils using > apt-get autoremove ... > apt-get install ... > > Should I, probably, download the latest version manually and then install > them? > > Regards, > Glib > > > Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. > Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. > Vorsitzender des Aufsichtsrates: Edgar Frank > > -----Original Message----- > > From: Sergio Campamá [mailto:sergiocamp...@gmail.com] On Behalf Of Sergio > Campamá > Sent: Monday, June 27, 2011 5:02 PM > To: Dovgych, Glib > Cc: mspgcc-users@lists.sourceforge.net > Subject: Re: [Mspgcc-users] FW: MSPGCC Uniarch installation instructions > > Tell me if it works or not, so I can help you get it running... > --------------------------------------- > Sergio Campamá > sergiocamp...@gmail.com > > > > > On Jun 27, 2011, at 10:55 PM, Dovgych, Glib wrote: > > > Thanks! > > > > Hope it helps :) > > > > Best regards, > > Glib > > > > > > Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. > > Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. > > Vorsitzender des Aufsichtsrates: Edgar Frank > > > > -----Original Message----- > > > > From: Sergio Campamá [mailto:sergiocamp...@gmail.com] On Behalf Of Sergio > > Campamá > > Sent: Monday, June 27, 2011 4:55 PM > > To: Dovgych, Glib > > Cc: mspgcc-users@lists.sourceforge.net > > Subject: Re: [Mspgcc-users] FW: MSPGCC Uniarch installation instructions > > > > Yes, try reinstalling the latest binutils and gcc for your system, and when > > you don't get the error, follow the instructions from the top again.... > > > > Regards, > > --------------------------------------- > > Sergio Campamá > > sergiocamp...@gmail.com > > > > > > > > > > On Jun 27, 2011, at 10:47 PM, Dovgych, Glib wrote: > > > >> Hi Sergio, > >> > >> Here's what I got: > >> msp430@msp430-Latitude-D610:~/temp$ gcc main.c > >> /usr/local/lib/gcc/i686-pc-linux-gnu/4.5.2/../../../../i686-pc-linux-gnu/bin/ld: > >> cannot find crtbegin.o: No such file or directory > >> /usr/local/lib/gcc/i686-pc-linux-gnu/4.5.2/../../../../i686-pc-linux-gnu/bin/ld: > >> cannot find -lgcc > >> /usr/local/lib/gcc/i686-pc-linux-gnu/4.5.2/../../../../i686-pc-linux-gnu/bin/ld: > >> cannot find -lgcc_s > >> collect2: ld returned 1 exit status > >> > >> Should I reinstall gcc first and then install binutils? > >> > >> Regards, > >> Glib > >> > >> > >> Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. > >> Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. > >> Vorsitzender des Aufsichtsrates: Edgar Frank > >> > >> -----Original Message----- > >> > >> From: Sergio Campamá [mailto:scamp...@ing.puc.cl] > >> Sent: Monday, June 27, 2011 4:38 PM > >> Cc: mspgcc-users@lists.sourceforge.net > >> Subject: Re: [Mspgcc-users] FW: MSPGCC Uniarch installation instructions > >> > >> Hey Dovgych, > >> > >> You have a problem with your installed version of gcc. If you see lines > >> 91, 92, and 93 of the config file, the linker process does not find the > >> lib files. Try upgrading your system to newer versions of binutils and > >> gcc... > >> > >> As a test, create a temp folder in your home > >> > >> mkdir temp > >> cd temp > >> > >> Then create a file with the bare minimum to compile, and compile it > >> > >> echo "int main(){}" >> main.c > >> gcc main.c > >> > >> It should work. If you get an error complaining about libgcc and libgcc_s, > >> you have a faulty gcc installation. Try that and tell me how it goes.. > >> --------------------------------------- > >> Sergio Campamá > >> sergiocamp...@gmail.com > >> > >> > >> > >> > >> On Jun 27, 2011, at 7:38 PM, Dovgych, Glib wrote: > >> > >>> Hi all, > >>> > >>> I tried to follow the instructions in this guide, which are pretty much > >>> the same as in .patch files themselve, but still I did everything as it > >>> was written there. > >>> But on the step of running binutils ./configure I've got the same error > >>> as I got before, when I was trying to do the same following the > >>> instructions from .patch file: > >>> > >>> msp430@msp430-Latitude-D610:~/msp430/mspgcc-20110612/BUILD/binutils$ sudo > >>> ../../binutils-2.21/configure --target=msp430 --prefix=/usr/local/mspgcc > >>> 2>&1 | tee co checking build system type... i686-pc-linux-gnu checking > >>> host system type... i686-pc-linux-gnu checking target system type... > >>> msp430-unknown-none checking for a BSD-compatible install... > >>> /usr/bin/install -c checking whether ln works... yes checking whether ln > >>> -s works... yes checking for a sed that does not truncate output... > >>> /bin/sed checking for gawk... no checking for mawk... mawk checking for > >>> gcc... gcc checking for C compiler default output file name... > >>> configure: error: in `/home/msp430/msp430/mspgcc-20110612/BUILD/binutils': > >>> configure: error: C compiler cannot create executables See `config.log' > >>> for more details. > >>> > >>> Config.log is attached. > >>> > >>> I'm using Ubuntu 10.10 but I'm a newby in Linux. Is it a problem with my > >>> Ubuntu version or am I doing something wrong? > >>> > >>> I've googled for this error and the most common problem is not-installed > >>> Build'essential package, which I have installed before starting this > >>> stuff. > >>> > >>> Will appreciate any help. > >>> > >>> Best regards, > >>> Glib > >>> > >>> > >>> Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. > >>> Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. > >>> Vorsitzender des Aufsichtsrates: Edgar Frank > >>> > >>> -----Original Message----- > >>> > >>> From: Sergio Campamá [mailto:sergiocamp...@gmail.com] > >>> Sent: Sunday, June 26, 2011 12:30 AM > >>> To: mspgcc-users@lists.sourceforge.net > >>> Subject: [Mspgcc-users] MSPGCC Uniarch installation instructions > >>> > >>> For the lazy people as me, here's a guide on how to install mspgcc > >>> uniarch on ubuntu, it has been tested on ubuntu server 11.04 64 bits > >>> edition. Should work on other versions too. > >>> > >>> https://github.com/sergiocampama/Launchpad/blob/master/README.md > >>> > >>> Regards! > >>> --------------------------------------- > >>> Sergio Campamá > >>> sergiocamp...@gmail.com > >>> > >>> > >>> > >>> > >>> > >>> ------------------------------------------------------------------------------ > >>> All the data continuously generated in your IT infrastructure contains a > >>> definitive record of customers, application performance, security > >>> threats, fraudulent activity and more. Splunk takes this data and makes > >>> sense of it. Business sense. IT sense. Common sense.. > >>> http://p.sf.net/sfu/splunk-d2d-c1 > >>> _______________________________________________ > >>> Mspgcc-users mailing list > >>> Mspgcc-users@lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/mspgcc-users > >>> > >>> ------------------------------------------------------------------------------ > >>> All of the data generated in your IT infrastructure is seriously valuable. > >>> Why? It contains a definitive record of application performance, security > >>> threats, fraudulent activity, and more. Splunk takes this data and makes > >>> sense of it. IT sense. And common sense. > >>> http://p.sf.net/sfu/splunk-d2d-c2_______________________________________________ > >>> Mspgcc-users mailing list > >>> Mspgcc-users@lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/mspgcc-users > >> > >> > >> ------------------------------------------------------------------------------ > >> All of the data generated in your IT infrastructure is seriously valuable. > >> Why? It contains a definitive record of application performance, security > >> threats, fraudulent activity, and more. Splunk takes this data and makes > >> sense of it. IT sense. And common sense. > >> http://p.sf.net/sfu/splunk-d2d-c2 > >> _______________________________________________ > >> Mspgcc-users mailing list > >> Mspgcc-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/mspgcc-users > >> > > > > > > > > ------------------------------------------------------------------------------ > All of the data generated in your IT infrastructure is seriously valuable. > Why? It contains a definitive record of application performance, security > threats, fraudulent activity, and more. Splunk takes this data and makes > sense of it. IT sense. And common sense. > http://p.sf.net/sfu/splunk-d2d-c2 > _______________________________________________ > Mspgcc-users mailing list > Mspgcc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mspgcc-users > ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
