Hi! Hmm... I think I have the same problem but with different reason... I have a board (custom) and want to attach the FET430UIF to it. Using Windows it works. But with mspdebug ti does not... neither using raw USB nor ttyUSB mode.
This is what happens using the serial port (yes, ttyUSB1 is correct): Trying to open UIF on /dev/ttyUSB1... Initializing FET... FET protocol version is 20408002 Configured for Spy-Bi-Wire Set Vcc: 3000 mV fet: FET returned error code 4 (Could not find device (or device not supported)) fet: command C_IDENT1 failed fet: identify failed Trying again... Initializing FET... FET protocol version is 20408002 Configured for Spy-Bi-Wire Sending reset... uif: read error: Connection timed out warning: fet: reset failed fet: FET returned error code 4 (Could not find device (or device not supported)) warning: fet: set VCC failed fet: reply type mismatch fet: command C_IDENT1 failed fet: identify failed And this using the raw interface: TI3410 device is in boot config, setting active Initializing FET... FET protocol version is 20408002 Configured for Spy-Bi-Wire ti3410: can't receive data: No such device warning: fet: set VCC failed ti3410: can't send data: No such device fet: command C_IDENT1 failed fet: identify failed Trying again... Initializing FET... ti3410: can't send data: No such device fet: open failed ti3410: warning: TI_CLOSE_PORT failed: No such device Any ideas? Cheers nils Am 13.11.2011 11:52, schrieb Stephan Goldenberg: > Am Sonntag, den 13.11.2011, 09:56 +1300 schrieb Daniel Beer: >> On Sat, Nov 12, 2011 at 06:57:34PM +0100, Stephan Goldenberg wrote: >>> Am Samstag, den 12.11.2011, 12:29 +1300 schrieb Daniel Beer: >>> >>>> The "uif" driver is just for the FET430UIF (v2) and eZ430-F2013 tools. >>> >>> UH-HUH...I got V1.4a >>> >>>> The eZ430-RF2500, Launchpad and Chronos use a slightly different >>>> protocol, which the "rf2500" driver supports. >>> >>> Hi, >>> >>> thanks for the new version but it's still not working with FET430UIF >>> connected to 430F149 board (Itead) running Debian sid. >>> >>> oppa@oppa-mag:~$ /usr/bin/mspdebug -j uif >>> MSPDebug version 0.18 - debugging tool for MSP430 MCUs >>> Copyright (C) 2009-2011 Daniel Beer <dlb...@gmail.com> >>> This is free software; see the source for copying conditions. There is >>> NO >>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >>> PURPOSE. >>> >>> Searching for firmware for TI3410... >>> - checking /usr/local/lib//mspdebug/ti_3410.fw.ihex >>> Loaded 13765 byte firmware image (checksum = 0xb5) >>> Starting download... >>> ti3410: warning: can't detach kernel driver: Operation not permitted >>> ti3410: can't claim interface: Operation not permitted >>> ti3410: firmware download failed >>> oppa@oppa-mag:~$ su -c '/usr/bin/mspdebug -j uif' >>> Passwort: >>> MSPDebug version 0.18 - debugging tool for MSP430 MCUs >>> Copyright (C) 2009-2011 Daniel Beer <dlb...@gmail.com> >>> This is free software; see the source for copying conditions. There is >>> NO >>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >>> PURPOSE. >>> >>> Searching for firmware for TI3410... >>> - checking /usr/local/lib//mspdebug/ti_3410.fw.ihex >>> Loaded 13765 byte firmware image (checksum = 0xb5) >>> Starting download... >>> ti3410: warning: can't detach kernel driver: No data available >>> ti3410: warning: reset failed: No such device >>> Waiting for TI3410 reset... >>> TI3410 device is in boot config, setting active >>> Initializing FET... >>> FET protocol version is 20408002 >>> Configured for JTAG (2) >>> ti3410: can't receive data: No such device >>> warning: fet: set VCC failed >>> ti3410: can't send data: No such device >>> fet: command C_IDENT1 failed >>> fet: identify failed >>> Trying again... >>> Initializing FET... >>> ti3410: can't send data: No such device >>> fet: open failed >>> ti3410: warning: TI_CLOSE_PORT failed: No such device >>> oppa@oppa-mag:~$ lsusb >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 004 Device 017: ID 0451:f430 Texas Instruments, Inc. MSP-FET430UIF >>> JTAG Tool >>> >>> Does this mean V1.4a is not supported ? >> >> Hi Stephan, >> >> Under Linux, the FET430UIF should appear as /dev/ttyUSB0 (or similar), >> so try this instead: >> >> mspdebug -j uif -d /dev/ttyUSB0 >> >> Without the -d argument, the raw USB interface is used, which is only >> suitable for systems without kernel drivers for the TI3410. >> >> Cheers, >> Daniel >> > Hi, > > that's even worse. There is no /dev/ttyUSB* : > > oppa@oppa-mag:~$ su -c '/usr/bin/mspdebug -j uif -d /dev/ttyUSB0' > Passwort: > MSPDebug version 0.18 - debugging tool for MSP430 MCUs > Copyright (C) 2009-2011 Daniel Beer <dlb...@gmail.com> > This is free software; see the source for copying conditions. There is > NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > PURPOSE. > > Trying to open UIF on /dev/ttyUSB0... > uif: can't open serial device: /dev/ttyUSB0: No such file or directory > oppa@oppa-mag:~$ ls /dev/ttyU* > ls: Zugriff auf /dev/ttyU* nicht möglich: Datei oder Verzeichnis nicht > gefunden > oppa@oppa-mag:~$ ls /dev/tty* > /dev/tty /dev/tty19 /dev/tty3 /dev/tty40 /dev/tty51 /dev/tty62 > /dev/tty0 /dev/tty2 /dev/tty30 /dev/tty41 /dev/tty52 /dev/tty63 > /dev/tty1 /dev/tty20 /dev/tty31 /dev/tty42 /dev/tty53 /dev/tty7 > /dev/tty10 /dev/tty21 /dev/tty32 /dev/tty43 /dev/tty54 /dev/tty8 > /dev/tty11 /dev/tty22 /dev/tty33 /dev/tty44 /dev/tty55 /dev/tty9 > /dev/tty12 /dev/tty23 /dev/tty34 /dev/tty45 /dev/tty56 /dev/ttyS0 > /dev/tty13 /dev/tty24 /dev/tty35 /dev/tty46 /dev/tty57 /dev/ttyS1 > /dev/tty14 /dev/tty25 /dev/tty36 /dev/tty47 /dev/tty58 /dev/ttyS2 > /dev/tty15 /dev/tty26 /dev/tty37 /dev/tty48 /dev/tty59 /dev/ttyS3 > /dev/tty16 /dev/tty27 /dev/tty38 /dev/tty49 /dev/tty6 > /dev/tty17 /dev/tty28 /dev/tty39 /dev/tty5 /dev/tty60 > /dev/tty18 /dev/tty29 /dev/tty4 /dev/tty50 /dev/tty61 > > Stephan -- kernel concepts GbR Tel: +49-271-771091-12 Sieghuetter Hauptweg 48 Fax: +49-271-771091-19 D-57072 Siegen Mob: +49-176-21024535 http://www.kernelconcepts.de ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
