On Tue, Sep 04, 2012 at 09:59:57AM -0600, Mark Rages wrote: > Yes, I'm using FET-430UIF. How do I identify the firmware? I get > this from mspdebug: > > $ mspdebug uif -d /dev/ttyTIUSB > MSPDebug version 0.18 - debugging tool for MSP430 MCUs > Copyright (C) 2009-2011 Daniel Beer <dlb...@gmail.com> > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > Trying to open UIF on /dev/ttyTIUSB... > Initializing FET... > FET protocol version is 20107000 > Configured for Spy-Bi-Wire > Set Vcc: 3000 mV > Device: MSP430F2274 > Code memory starts at 0x8000 > Number of breakpoints: 2 > > Which debugger/firmware version would you recommend for this? I have > the FET430UIF, and Lauchpads and ez430 sticks and a GoodFETs.
Hi Mark, You have FET firmware v2, and the FET430UIF should be fine. If mspdebug doesn't say "Sending reset..." on startup, then it shouldn't be resetting your chip. What do you get when you type "regs" after connecting? - Daniel -- Daniel Beer <dlb...@gmail.com> www.dlbeer.co.nz IRC: inittab (Freenode) PGP key: 2048D/160A553B ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
