I'm using this. SSM.exe . /log:c:\temp /d /install /nu /a /s /nobinpwd /cspwd:"BIOS Password"
From: [email protected] [mailto:[email protected]] On Behalf Of Avery, James Sent: Wednesday, August 07, 2013 7:24 PM To: [email protected] Subject: [mssms] HP SSM.exe and deploying HP Drivers Guys, I've tried using SSM to deploy HP Drivers as Richard Zuraff pointed me to PPT slide. However, to no avail am I able to make this work successfully for several drivers, even though the drivers SSM approved by HP. I have successfully updated my BIOS's thanks to Richards PPT. I must say, the SSM is perfect for updating HP BIOS's. About my driver issues. I'm using the following cmd line: SSM.exe . /log:c:\temp /INSTALL /ACCEPT /NOAVAUPDATE /NODIALOG /DEBUG /NOREBOOT What I have noticed is, drivers/software such as HP Protect Tools and Validity Fingerprint reader don't install. But I can see where a majority of drivers do install. However, when it finishes installing the drivers/software the system reboots (not from a restart I added). On some hardware the system will boot back into windows and bypass the rest of my task sequence. Thoughts? James (pulling hair out) ________________________________ This e-mail is intended solely for the person or entity to which it is addressed and may contain confidential and/or privileged information. Any review, dissemination, copying, printing or other use of this e-mail by persons or entities other than the addressee is prohibited. If you have received this e-mail in error, please contact the sender immediately and delete the material from any computer. To unsubscribe send an email to: [email protected]<mailto:[email protected]> Hitachi Consulting Corporation, 14643 Dallas Parkway, Suite 800, Dallas, Texas 75254 (HCAD0411) ________________________________
