- the first client calculates the hash, the 2nd client downloads into the cache (the first doesn't!). The first finally could use the 2nd client (I've tested that to death).
The third of course here From: [email protected] [mailto:[email protected]] On Behalf Of Roland Janus Sent: Dienstag, 24. September 2013 23:06 To: [email protected] Subject: RE: [mssms] Branch Cache Usually you would use distributed cache, otherwise you may use a DP anyway. To consider: - Every client in a subnet will download the content again, they don't share across subnets - It works best if there aren't many subnets at a location and of course a client only provides content if it downloaded itself and is still available to others - We use site GPOs to enable/disable branchcache on clients. If you can, look into that. - It will always prefer BC over a local DP, it is slower. - I'm not in favor of enabling it like for everyone on large sites, that's why it is not enabled when there is a local DP (using the GPO) - You might have issues with clients with small disks. Don't expect too much about. It is not a DP or Nomad or OneSite. Not even close. But for smaller sites: It is free. With 2012 it is supposed to be better, but with 2008: - the first client calculates the hash, the 2nd client downloads into the cache (the first doesn't!). The first finally could use the 2nd client (I've tested that to death). - With every reboot of the server the hash was gone and it started from scratch. Yeah, really. -Roland From: [email protected] [mailto:[email protected]] On Behalf Of Todd Hemsell Sent: Dienstag, 24. September 2013 22:02 To: [email protected] Subject: Re: [mssms] Branch Cache theoretically it would be possible to use a DCM rule to enable and disable branch cache on machines as they went to and left a particular site? What would the affect be of turning it on at a small site then the laptop goes to a larger site? any idea? On Tue, Sep 24, 2013 at 2:39 PM, Trevor Sullivan <[email protected]> wrote: Right here: http://technet.microsoft.com/en-us/library/hh831696.aspx It's ridiculously easy to get set up. A couple PowerShell commands, and you're good to go. Cheers, Trevor Sullivan From: [email protected] [mailto:[email protected]] On Behalf Of Todd Hemsell Sent: Tuesday, September 24, 2013 2:38 PM To: [email protected] Subject: [mssms] Branch Cache I am unable to locate a good doc for branch cache GPO for CM12. Does anyone have a link to a good doc? /Todd This is so clients can share content on the same subnet.
