Basically what Mark did with less hardware.
There is the host having everything VM based. The host is connected to a router for internet. Now a want real hardware being able to use the DC (for DHCP etc.) and CM12. But I can’t figure how I would connect that client to the host. Like this: Notebook -> Host (Hyper-V, VMs with DC with RRAS and NAT, CM12, Clients etc.) -> Router (DHCP for the host and normal clients) -> ISP What’s in bold is working, but how am I supposed to connect a client to use all the resources from within Hyper-V? Basically it should connect to the DC and get part of the scope and everything in there. Can only be the host, as said the router wouldn’t work as it would hand out the DHCP data from the ISP and not my DC. What you did with your laptop, so how is it connected? Hope I explained it good enough. From: [email protected] [mailto:[email protected]] On Behalf Of Dzikowski, Michael Sent: Mittwoch, 5. Februar 2014 18:14 To: '[email protected]' Subject: RE: [mssms] Access Hyper-V lab with physical hardware? You can certainly have a DC that is a VM. You could also, have a physical box for your DC. Or both... I'm confused when you say "physical boc attached to hyper-v host" - what are you trying to accomplish there? I have a server at home that runs my lab. I present storage to it from my NAS. I have a DC, ConfigMgr server, virtual workstation clients, etc. I have another physical laptop that is on the same subnet and domain joined to my lab. Sent with Good ( <http://www.good.com> www.good.com) -----Original Message----- From: Roland Janus [ <mailto:[email protected]> [email protected]] Sent: Wednesday, February 05, 2014 10:16 AM Central Standard Time To: <mailto:[email protected]> [email protected] Subject: RE: [mssms] Access Hyper-V lab with physical hardware? Thanks, but are you saying I need a physical box for the DC and a physical workgroup switch ( ?? ) to do that or is this just your choice? -roland From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Mark Mears Sent: Mittwoch, 5. Februar 2014 16:32 To: [email protected] <mailto:[email protected]> Subject: RE: [mssms] Access Hyper-V lab with physical hardware? Roland, Here is my setup at home for my lab: Physical machine used as Hyper-V Host Physical machine used as DC All other machines are virtual The way I accomplish this is to place the Hyper-V host and guests on a particular LAN segment using a workgroup switch. I use 192.168.10.x as the network with a 255.255.255.0 subnet mask. I assign a DHCP scope to exist and grant addresses from 192.168.10.101-200 for DHCP clients. The range below that scope I use for statically assigned machines (the servers). Any machine that exists on this segment is able to utilize/connect to these virtual machines. I have one open port on the workgroup switch for adding additional wired clients, I also have my wireless laptop in this space as a DHCP client so that I can work with the machines using my laptop while in another room (not the Super Bowl!). Thanks, _____ Mark Mears <mailto:[email protected]%0d> [email protected] Phone: (757) 945-2651 <http://www.cireson.com/> <http://twitter.com/teamcireson> Check out our System Center App Store: www.cireson.com/app-store _____ From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Roland Janus Sent: Wednesday, February 5, 2014 7:20 AM To: [email protected] <mailto:[email protected]> Subject: [mssms] Access Hyper-V lab with physical hardware? I have a Hyper-V based lab (win 8.1), with a DC (DHCP, DNS), CM12. Everything is working with VMs. Is it possible to use those systems with a physical box attached to the Hyper-V host? I have an additional NIC added to the host, but I can’t get my head around how, if that is even do-able. -R
<<image001.png>>
<<image002.jpg>>
