:)
Hm, the nic2 is added as external as a vnet switch? It does get the IP from the DC? That means that switch needs to be connected to the DC? From: [email protected] [mailto:[email protected]] On Behalf Of Marcum, John Sent: Mittwoch, 5. Februar 2014 19:30 To: [email protected] Subject: RE: [mssms] Access Hyper-V lab with physical hardware? A picture is worth 1000 words. See attached. _____ John Marcum Lead Desktop Engineer Bradley Arant Boult Cummings LLP _____ From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Roland Janus Sent: Wednesday, February 05, 2014 11:50 AM To: [email protected] <mailto:[email protected]> Subject: RE: [mssms] Access Hyper-V lab with physical hardware? I was wondering about “workgroup”, but I guess you just mean a regular switch? And that’s exactly what I don’t get. How did you allow that client to see the DC and CM? An external Nic only? I have that (USB based, but seems to behave as a regular one), but I can’t get the client even see anything in hyper-v. From an already installed OS. But shouldn’t that client being able to pick up a dhcp address from the DC in the VM? I’m probably just missing proper IP-config on the host nic? -R From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Mark Mears Sent: Mittwoch, 5. Februar 2014 18:25 To: [email protected] <mailto:[email protected]> Subject: RE: [mssms] Access Hyper-V lab with physical hardware? Actually I did have a virtual and a physical DC until I started getting additional machines as VMs and ran out of RAM. The workgroup switch allows addition of additional external resources and lets them participate in the lab as well. Really nice for rebuilding my laptop from time to time! The Hyper-V server also has multiple NICs to allow for internal and external networks. Thanks, _____ Mark Mears <mailto:[email protected]%0d> [email protected] Phone: (757) 945-2651 <http://www.cireson.com/> <http://twitter.com/teamcireson> Check out our System Center App Store: www.cireson.com/app-store _____ From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Dzikowski, Michael Sent: Wednesday, February 5, 2014 11:14 AM To: '[email protected]' Subject: RE: [mssms] Access Hyper-V lab with physical hardware? You can certainly have a DC that is a VM. You could also, have a physical box for your DC. Or both... I'm confused when you say "physical boc attached to hyper-v host" - what are you trying to accomplish there? I have a server at home that runs my lab. I present storage to it from my NAS. I have a DC, ConfigMgr server, virtual workstation clients, etc. I have another physical laptop that is on the same subnet and domain joined to my lab. Sent with Good (www.good.com <http://www.good.com> ) -----Original Message----- From: Roland Janus [[email protected] <mailto:[email protected]> ] Sent: Wednesday, February 05, 2014 10:16 AM Central Standard Time To: [email protected] <mailto:[email protected]> Subject: RE: [mssms] Access Hyper-V lab with physical hardware? Thanks, but are you saying I need a physical box for the DC and a physical workgroup switch ( ?? ) to do that or is this just your choice? -roland From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Mark Mears Sent: Mittwoch, 5. Februar 2014 16:32 To: [email protected] <mailto:[email protected]> Subject: RE: [mssms] Access Hyper-V lab with physical hardware? Roland, Here is my setup at home for my lab: Physical machine used as Hyper-V Host Physical machine used as DC All other machines are virtual The way I accomplish this is to place the Hyper-V host and guests on a particular LAN segment using a workgroup switch. I use 192.168.10.x as the network with a 255.255.255.0 subnet mask. I assign a DHCP scope to exist and grant addresses from 192.168.10.101-200 for DHCP clients. The range below that scope I use for statically assigned machines (the servers). Any machine that exists on this segment is able to utilize/connect to these virtual machines. I have one open port on the workgroup switch for adding additional wired clients, I also have my wireless laptop in this space as a DHCP client so that I can work with the machines using my laptop while in another room (not the Super Bowl!). Thanks, _____ Mark Mears <mailto:[email protected]%0d> [email protected] Phone: (757) 945-2651 <http://www.cireson.com/> <http://twitter.com/teamcireson> Check out our System Center App Store: www.cireson.com/app-store _____ From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Roland Janus Sent: Wednesday, February 5, 2014 7:20 AM To: [email protected] <mailto:[email protected]> Subject: [mssms] Access Hyper-V lab with physical hardware? I have a Hyper-V based lab (win 8.1), with a DC (DHCP, DNS), CM12. Everything is working with VMs. Is it possible to use those systems with a physical box attached to the Hyper-V host? I have an additional NIC added to the host, but I can’t get my head around how, if that is even do-able. -R _____ Confidentiality Notice: This e-mail is from a law firm and may be protected by the attorney-client or work product privileges. If you have received this message in error, please notify the sender by replying to this e-mail and then delete it from your computer. _____ Confidentiality Notice: This e-mail is from a law firm and may be protected by the attorney-client or work product privileges. If you have received this message in error, please notify the sender by replying to this e-mail and then delete it from your computer.
<<image001.png>>
<<image002.jpg>>
