any AV software blocking the boot image copying ? try disabling it and try again.
On Wed, Sep 10, 2014 at 4:49 AM, Johns, Damon (DoJ) < [email protected]> wrote: > Do you have all the pre reqs installed on the server that you are trying > to install the Remote PXE enabled DP to? > > > > > http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0%28TechNet.10%29#BKMK_SiteSystemRolePrereqs > > > > There should be some logs you can review on your server in > \SMS_DP$\sms\logs > > > > > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Jeff Poling > *Sent:* Wednesday, 10 September 2014 11:25 AM > *To:* [email protected] > *Subject:* RE: [mssms] SMSPXE.log InstallBootFilesForImage failed. > 0x80004005 > > > > I would make sure that your site server computer account is a member of > the local administrator group on all of your DPs. Then reinstall PXE on > the DP. > > Jeff > ------------------------------ > > Date: Tue, 9 Sep 2014 20:50:30 -0400 > Subject: [mssms] SMSPXE.log InstallBootFilesForImage failed. 0x80004005 > From: [email protected] > To: [email protected] > > Need some help here. > > Just setting up PXE on configMgr 2012 SP1 . Working fine on my local > DP's, moved on to my remote dps in the field. The first 2 are not > completing. The SMSPXE.log shows the following error: > > InstallBootFilesForImage failed. 0x80004005 (see below) and it basically > tries every 2 minutes. Searching the web I can see that lots of folks have > encountered this, but what I cannot find is how they resolved it. > > Under the Remoteinstall directory when comparing subfolders againas a > working PXE DP I can see that the SMSTempBootFiles Directory and the Stores > Dir do not get created. And the Mgmt and WDSClienUnattend Folders are not > in a shared state. > > If you have seen this issue, would you mind sharing how you dealt with it? > > > > InstallBootFilesForImage failed. 0x80004005]LOG]!><time="20:11:11.136+240" > date="09-09-2014" component="SMSPXE" context="" type="3" thread="18936" > file="bootimagemgr.cpp:1608"> > <![LOG[Warning: Failed to copy the needed boot binaries from the boot > image F:\RemoteInstall\SMSImages\LMC00367\WinPE.LMC00367.wim. > The operation completed successfully. (Error: 00000000; Source: > Windows)]LOG]!><time="20:11:11.136+240" date="09-09-2014" > component="SMSPXE" context="" type="3" thread="18936" > file="bootimagemgr.cpp:1275"> > <![LOG[Failed adding image > F:\RemoteInstall\SMSImages\LMC00367\WinPE.LMC00367.wim. Will Retry.. > Unspecified error (Error: 80004005; Source: > Windows)]LOG]!><time="20:11:11.136+240" date="09-09-2014" > component="SMSPXE" context="" type="3" thread="18936" > file="bootimagemgr.cpp:1935"> > <![LOG[File > F:\RemoteInstall\SMSTemp\2014.09.09.20.11.10.336.{0CEE6F88-B22A-4CFE-9434-DA520ABD0D0F}.boot.bcd > deleted.]LOG]!><time="20:11:11.136+240" date="09-09-2014" > component="SMSPXE" context="" type="1" thread="18936" > file="bootimagecache.cpp:267"> > <![LOG[File > F:\RemoteInstall\SMSTemp\2014.09.09.20.11.10.336.{0CEE6F88-B22A-4CFE-9434-DA520ABD0D0F}.boot.bcd.log > deleted.]LOG]!><time="20:11:11.136+240" date="09-09-2014" > component="SMSPXE" context="" type="1" thread="18936" > file="bootimagecache.cpp:282"> > > > > > > ------------------------------ > > CONFIDENTIALITY NOTICE AND DISCLAIMER > The information in this transmission may be confidential and/or protected > by legal professional privilege, and is intended only for the person or > persons to whom it is addressed. If you are not such a person, you are > warned that any disclosure, copying or dissemination of the information is > unauthorised. If you have received the transmission in error, please > immediately contact this office by telephone, fax or email, to inform us of > the error and to enable arrangements to be made for the destruction of the > transmission, or its return at our cost. No liability is accepted for any > unauthorised use of the information contained in this transmission. > >
