Yes I stopped the AV service and this did not seem to help. Also I did re-review the requirements, and they seem to be correct. After reviewing SMSDPPROV.log which does show the following :Finding Wimgapi.Dll :MsiEnumRelatedProducts failed :FindProduct failed; 0x80070103 :Found WIM upgrade code :GetProcAddress failed for WIMExtractImagePath :ExtractPXEImage failed; 0x8007007f
Searching on this now.... On Wed, Sep 10, 2014 at 2:46 AM, Niall Brady <[email protected]> wrote: > any AV software blocking the boot image copying ? try disabling it and try > again. > > > On Wed, Sep 10, 2014 at 4:49 AM, Johns, Damon (DoJ) < > [email protected]> wrote: > >> Do you have all the pre reqs installed on the server that you are >> trying to install the Remote PXE enabled DP to? >> >> >> >> >> http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0%28TechNet.10%29#BKMK_SiteSystemRolePrereqs >> >> >> >> There should be some logs you can review on your server in >> \SMS_DP$\sms\logs >> >> >> >> >> >> >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Jeff Poling >> *Sent:* Wednesday, 10 September 2014 11:25 AM >> *To:* [email protected] >> *Subject:* RE: [mssms] SMSPXE.log InstallBootFilesForImage failed. >> 0x80004005 >> >> >> >> I would make sure that your site server computer account is a member of >> the local administrator group on all of your DPs. Then reinstall PXE on >> the DP. >> >> Jeff >> ------------------------------ >> >> Date: Tue, 9 Sep 2014 20:50:30 -0400 >> Subject: [mssms] SMSPXE.log InstallBootFilesForImage failed. 0x80004005 >> From: [email protected] >> To: [email protected] >> >> Need some help here. >> >> Just setting up PXE on configMgr 2012 SP1 . Working fine on my local >> DP's, moved on to my remote dps in the field. The first 2 are not >> completing. The SMSPXE.log shows the following error: >> >> InstallBootFilesForImage failed. 0x80004005 (see below) and it basically >> tries every 2 minutes. Searching the web I can see that lots of folks have >> encountered this, but what I cannot find is how they resolved it. >> >> Under the Remoteinstall directory when comparing subfolders againas a >> working PXE DP I can see that the SMSTempBootFiles Directory and the Stores >> Dir do not get created. And the Mgmt and WDSClienUnattend Folders are not >> in a shared state. >> >> If you have seen this issue, would you mind sharing how you dealt with it? >> >> >> >> InstallBootFilesForImage failed. >> 0x80004005]LOG]!><time="20:11:11.136+240" date="09-09-2014" >> component="SMSPXE" context="" type="3" thread="18936" >> file="bootimagemgr.cpp:1608"> >> <![LOG[Warning: Failed to copy the needed boot binaries from the boot >> image F:\RemoteInstall\SMSImages\LMC00367\WinPE.LMC00367.wim. >> The operation completed successfully. (Error: 00000000; Source: >> Windows)]LOG]!><time="20:11:11.136+240" date="09-09-2014" >> component="SMSPXE" context="" type="3" thread="18936" >> file="bootimagemgr.cpp:1275"> >> <![LOG[Failed adding image >> F:\RemoteInstall\SMSImages\LMC00367\WinPE.LMC00367.wim. Will Retry.. >> Unspecified error (Error: 80004005; Source: >> Windows)]LOG]!><time="20:11:11.136+240" date="09-09-2014" >> component="SMSPXE" context="" type="3" thread="18936" >> file="bootimagemgr.cpp:1935"> >> <![LOG[File >> F:\RemoteInstall\SMSTemp\2014.09.09.20.11.10.336.{0CEE6F88-B22A-4CFE-9434-DA520ABD0D0F}.boot.bcd >> deleted.]LOG]!><time="20:11:11.136+240" date="09-09-2014" >> component="SMSPXE" context="" type="1" thread="18936" >> file="bootimagecache.cpp:267"> >> <![LOG[File >> F:\RemoteInstall\SMSTemp\2014.09.09.20.11.10.336.{0CEE6F88-B22A-4CFE-9434-DA520ABD0D0F}.boot.bcd.log >> deleted.]LOG]!><time="20:11:11.136+240" date="09-09-2014" >> component="SMSPXE" context="" type="1" thread="18936" >> file="bootimagecache.cpp:282"> >> >> >> >> >> >> ------------------------------ >> >> CONFIDENTIALITY NOTICE AND DISCLAIMER >> The information in this transmission may be confidential and/or protected >> by legal professional privilege, and is intended only for the person or >> persons to whom it is addressed. If you are not such a person, you are >> warned that any disclosure, copying or dissemination of the information is >> unauthorised. If you have received the transmission in error, please >> immediately contact this office by telephone, fax or email, to inform us of >> the error and to enable arrangements to be made for the destruction of the >> transmission, or its return at our cost. No liability is accepted for any >> unauthorised use of the information contained in this transmission. >> >> > >
