Yip, doing that, plus DNSSUFFIX
Anyways, don’t know if I make myself clear enough: There is NO activity on that machine whatsoever from the ConfigMgr agent. The log file says it’s going to register, but neither netmon/wireshark/network analyzer can find any network activity. It’s a vanilla Windows Server 2012 R2, no domain, no policies. From: [email protected] [mailto:[email protected]] On Behalf Of Russ Rimmerman Sent: Sunday, 2 November 2014 12:44 PM To: [email protected] Subject: RE: [mssms] ConfigMgr agent silent after install What command line are you using to install the client? Have you tried using /usepkicert, /nocrlcheck, and SMSMP=https://fqdn.of.your.mp switches along with your SMSSITECODE= ? From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of David O'Brien Sent: Saturday, November 1, 2014 8:00 PM To: [email protected] <mailto:[email protected]> Subject: RE: [mssms] ConfigMgr agent silent after install Disabled. And initial communication with the MP works. That's where it's getting the sources from. Sent from my Windows Phone _____ From: Russ Rimmerman <mailto:[email protected]> Sent: 2/11/2014 11:35 AM To: [email protected] <mailto:[email protected]> Subject: RE: [mssms] ConfigMgr agent silent after install CRL distribution point. Do you have CRL checking enabled or disabled? <http://777notes.files.wordpress.com/2012/08/image4.png> From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of David O'Brien Sent: Saturday, November 1, 2014 3:25 PM To: [email protected] <mailto:[email protected]> Subject: RE: [mssms] ConfigMgr agent silent after install Nothing on the MP. Like I said, the agent finishes installing and all network activity on that machine stops. CDP? Sent from my Windows Phone _____ From: Jason Sandys <mailto:[email protected]> Sent: 2/11/2014 5:13 AM To: [email protected] <mailto:[email protected]> Subject: RE: [mssms] ConfigMgr agent silent after install Have you checked the registration log on the MP? Also, is the CDP accessible from both the client and the MP? J From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of David O'Brien Sent: Friday, October 31, 2014 4:28 PM To: [email protected] <mailto:[email protected]> Subject: [mssms] ConfigMgr agent silent after install Hi all, right now I don't have any log files, but maybe somebody has seen something like this before. I'm in a locked-down DMZ environment on a freshly installed, from the Microsoft DVD, WS2012R2 WORKGROUP machine. No custom config on that server, besides a HOSTS file editing. The DMZ does not have a DNS server. Only port open to ConfigMgr is 443 (and later 8531). Agent installation runs fine. Network Analyzer shows communication (HTTPS) between the workgroup machine and the MP/DP on the internal network on port 443. ccmsetup exits with error code 0. Now should be the point where the agent tries to register. ClientIDStartupManager.log file shows that it's selecting the correct certificate and "executes registration synchronously". Then it sleeps for 297 seconds, and then another 296, another 295, and so on... During that whole time Network Analyzer shows no activity whatsoever, even though the network is still up. I can telnet to the MP on 443 just fine. The log file doesn't show any errors, just that it's sleeping for ever on and on. Sounds familiar? Cheers, ------- David http://www.david-obrien.net
