> Recently I received a SONY HBI-V1 video digitizer cartridge. I received it
> with only one diskette (Japanese texts written all over it) and no manual
> or diagram describing how to connect it.
It is easy to connect... It has only two connectors, and it does not even
matter witch you use. Plug one cable to cartridge and the other end to
VIDEO OUT in your VCR, TV or any other machine, that gives VIDEO OUT
signal. You can use this other connector in cartridge, if you still need
VIDEO OUT signal for some other equipment. The small switch near
connectors is just brightnes controll. (actually it is ment to
be used as terminator on / off)
After you have connected cables, you can use the internal proggram to
digitize screen 8,10=11 and 12 pictures by typeing :
CALL DG
That cartridge is also quite good commands to be used in own BASIC
proggrams, but probabby you don't need them, so I'm not going to write
that all now.
> Is it for instance possible to 'merge' live video with computer animations
> using this cartridge?
This cartridge has no superimpose features, and it is too slow to do that
with software, so... no, it is not possibble.
,_____.
_=_=_=_=!_MSX_!=_=_=_=_=_=_=_=_,
! A1ST ~--- - I ( o o o o o o )i
/--------------------------------`,
/ .::::::::::::::::::::::;::; ::::.,
/ :::.:.:.:::____________:::::!. -=- `,
~======================================
NYYRIKKI : [EMAIL PROTECTED]
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
