] But this does not apply to the square wave generators. When you
] write a 0 to registers 0 and 1, what's happening is that you TURN OFF THE
] OSCILLATORS. Since the PSG uses active low logic, the signal on the output
] is set to "1" and don't change with time.
Cool! After having been an MSX fan & programmer for over 12 years there are
still things which I don't seem too know.
Are there any more undocumented features in the PSG, the MSX1 VDP and any
other chips used in the MSX which all programmers and other MSX fans should
be aware of?
Best regards,
Alex
--
Alex Wulms/XelaSoft - MSX of anders NIX - Linux 4 ever
See my homepage for info on the *** XSA *** format
http://www.inter.nl.net/users/A.P.Wulms
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
