At 05:16 PM 2/14/98 +0000, you wrote:
>> Weet een van jullie of je van de joystick ingang
>> ook een uitgang kan maken, zodat je dingen kan
>> besturen via de joystick uitgangen...
>It is possible to send data through the joysticks-port. But
>unfortunately it is very limited. There is only one pin which can be
>used for this purpose. I can't recall which one it was but I can look
>it up...
Im Happy to inform that You can use max 6 bit's for output and 6 bits for
input using PSG ports 14 and 15.
I've connected PCprinterport and MSX joystickport and it's working OK.
(The MsxLaplink is still uncomplete.. I'll find time for that project )
The code for both machines is TurboPascal + ML.
If You need further information, let me know.
Sincerely Kari Lammassaari
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
