----------
> Van: Manuel Bilderbeek <[EMAIL PROTECTED]>
> Talking about SCSI interfaces:
> Which one is better: HSH or Gouda 1.001? (I can choose now)
I think Gouda, its faster and electronically stronger than the HSH. (I
broke a HSH after 1/2 year use and using Gouda now for over 2 years)
> What's the story about SCSI terminators?
Leave terminators on interface and last device in the chain, the rest no
terminator!
> What harddisks can I connect?
Everything: ZIP, JAZZ, Bernouli, Syquest, CD-ROMs every capacity harddisk
with a 50 pin cable or any other with the appropriate adapter/gender
changer. No more than 7 devices, including controller. (You can connect
tapestreamers, DAT drives, scanners, etc, but there is no software to use
them, but they still work)
> Do I always need a seperate powersupply for a harddisk?
Only if the drive is relative new or for use in Laptops (e.g. Quantum LPS
series)
I had one of those drives build into a Phillips 8250 with no problems.
>
> Is DOS2 built in in one of these interfaces?
In HSH, no. In Gouda, yes in MK, yes but not all of them.
> If so, does it give a problem since I already have DOS2 built in my MSX?
no, one will shut off the other.
>
> Etc!
>
> Any useful answers will probably be put in The Ultimate MSX FAQ!
>
> --
> Grtjs, Manuel
>
> PS: MSX 4 EVER! (Questions? See: http://www.faq.msxnet.org)
> PPS: Visit my homepage at http://www.sci.kun.nl/marie/home/manuelbi
>
> ****
> MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and
put
> in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without
the
> quotes :-) Problems? contact [EMAIL PROTECTED]
(www.stack.nl/~wiebe/mailinglist/)
> ****
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
