>>
>> [SCSI]
>> >> What harddisks can I connect?
>> >Everything: ZIP, JAZZ, Bernouli, Syquest, CD-ROMs [...]
>>
>> But forget about ZIP-plus (The ZIP with both parallel and
so-called SCSI
>> interface). This thing uses a controller which should
automatically
>> detect the difference between a parallel and SCSI
connection. The parallel
>> part is ok, but the SCSI implementation is that _lousy_,
that
>>
>> a) It won't work unless the ZIPplus is the only device in
the SCSI chain
>> b) if you have by any chance another device in the chain,
the cances that
>> it will get corrupted are almost 100%
>>
>> Eric (speaking out of own experience :-( )
>>
>So you have a ZIP drive connected to your MSX? I am
planning to do the same.
>Do you have any tips? I have a HSH SCSI interface.
Use a scsi-zipdrive... But I am not sure if the HSH can boot
from anther ID then ID 0... External scsi-zipdrives only can
use ID 5 or 6.
I use a scsi zipdrive with my megascsi and with novaxis
(with 1.59 eprom)
greetings
-----+-----+-----+-----+-----+-----+-----
Maico Arts
Isabella van Portugalstraat 9
5346 PJ OSS
the Netherlands
tel: +31-412-690757
fax: +31-412-690432
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
(using just one address is enough)
-----+-----+-----+-----+-----+-----+-----
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
