>>>>remove all parts from the ISA card and select a part of it to cut it in
>the
>>>>shape of a konami-size-cartridge.
>>>
>>>Easier: take any MSX ROM cartridge. No cutting required, looks better too.
>>
>>Than I should find some lousy MSX cartridge first, to tear apart.
>
>Eddy II, LOGO, enough of them.
Point taken!
>>>Actually, is the size of the connector strips the same for MSX and ISA?
>>
>>Yes, I checked, same spacing on the strips. (So a part of a Vesa Local Bus
>>card can be used aswell.)
>>Especially videocards have lots of connector strips on them.
>
>Also same amount of pins?
No there are more but you have to cut it 'konami size' anyway
>>>The simplest way to get a mapper is to start with a MegaROM cartridge,
>>>those already have a mapper IC inside. This is the way ESE does it.
>>>SCC is ideal for this purpose, because after your cartridge is finished,
>>>you can run Konami SCC games with SCC music.
>>
>>I know this, but I'm really very attached to my SCC. Don't want to crack
>the
>>only one I have open.
>
>I recently bought a F1-spirit cartridge at a stuffed animal fair (what was
>'rommelmarkt' again?), for fl.7,50. The reason this price was so low was
>that the asshole had cut out the game-ROM. Aargh. But anyway, I have a empty
>cartridge with SCC now... Where is the description of this ESE-SCC?
Lucky bastard!!
>~Grauw
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
