Pablo Vasques Bravo-Villalba wrote:
>
> "Giovanni R. Nunes" wrote:
> > No! ACE-1 is a MSX Board to be inserted in PC cases, has a Z84 at
> > 10Mhz, 8 Slots and 4 SIMM memory sockets. And you insert boards like a
> > PC (Video Board, Floppy Controller, etc...).
>
> Ahm, this was what I saw at Brasilia'96... :)
> I was dying for one of those, but then I had
> no money. <:)
>
> > The ACE-2 is a small (very-small) MSX board all circuits are replaced
> > by a Altera's FPGA, but a Z84 still at 10Mhz. :) Ah! ROM and RAM are
> > inserted in this board. Has one slot (because is a prototype) and a
> > switched power supply (half of board is reserverd for it).
>
> So the photos displayed the ACE2? Very, very
> cool indeed. Although the slot layout wouldn't
> allow anything so tiny AND with many slots. <:)
>
> > And wait for the future for a ACE-3, but this computer I don't talk...
> > :)
>
> You already talked! >:)
>
> > For finish... All boards are full MSX computers, you can put IDE,
> > SCSI, MoonSound, etc...
>
> If you can afford it. :P Leonard, are you
> listening?
>
Yeah ... I'm here ... =)
Cya MSXers ...
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
