"Giovanni R. Nunes" wrote:
> No! ACE-1 is a MSX Board to be inserted in PC cases, has a Z84 at
> 10Mhz, 8 Slots and 4 SIMM memory sockets. And you insert boards like a
> PC (Video Board, Floppy Controller, etc...).
Ahm, this was what I saw at Brasilia'96... :)
I was dying for one of those, but then I had
no money. <:)
> The ACE-2 is a small (very-small) MSX board all circuits are replaced
> by a Altera's FPGA, but a Z84 still at 10Mhz. :) Ah! ROM and RAM are
> inserted in this board. Has one slot (because is a prototype) and a
> switched power supply (half of board is reserverd for it).
So the photos displayed the ACE2? Very, very
cool indeed. Although the slot layout wouldn't
allow anything so tiny AND with many slots. <:)
> And wait for the future for a ACE-3, but this computer I don't talk...
> :)
You already talked! >:)
> For finish... All boards are full MSX computers, you can put IDE,
> SCSI, MoonSound, etc...
If you can afford it. :P Leonard, are you
listening?
[]s,
Parn
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
