> Monitor connector Philips
>
> pin 7 NC
> pin 6 +12V
> pin 3 AUDIO
> pin 8 NC
> pin 1 +5V
> pin 5 CVBS (color video PAL)
> pin 4 Ys (monochrome)
> pin 2 gnd ('luminance')
>
> My guess is I should use these pins:
>
> pin #3 for the audio
> pin #4 because it's a green monochrome monitor
> pin #2 GND
Normally, for a mixed video-signal as your monitor expects it, you use CVBS.
The rest you shouldn't use, indeed.
Use the GND pin for the returns of the CVBS and AUDIO signals.
Grtjs, Manuel ((m)ICQ UIN 41947405)
PS: MSX 4 EVER! (Questions? See: http://www.faq.msxnet.org/)
PPS: Visit my home page at http://bilderbeek.cjb.net/
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
