> > Perhaps that I was confused. As far as I know, there is a Z380 project
to
> > build a new 32-bit MSX and another Z380 project to make a Z380 card to
be
> > inserted into an existing MSX. I thought that the above mentioned
project
> was
> > the Z380 card project. But maybe I'm mistaken. I should better look this
> up
> > in the MSX hardware list on "The MSX Plaza" ;-)
>
> Both are the same project. You can use z380 card with MSX or alone as
> part of the MMSX project.
If you put a LPE Z380 card in an Evolution4 expander, and put another card
in it with all standard MSX peripherals like VDP, PSG, Keyboard-interface,
Joystickports, etc. Then you've got a new MSX. Such a card is now easier to
make since it appeared the v9958 is still available, and most other devices
have already been created in FPGA form by Ademir and ESE etc.
However, it seems very hard to co-operate on this point.
~Grauw
--
>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<
email me: [EMAIL PROTECTED] or ICQ: 10196372
visit my homepage at http://grauw.blehq.org/
>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<
****
Problems? contact [EMAIL PROTECTED] See also http://www.faq.msxnet.org/
****
