Hi,
> I had 2 256k eproms programed with the files on NYYRIKKI's site.
> The connection between pin 27 and pin 28 on IC 50 I could not find to
> cut it so I lifted pin 27 of the IC and connected this to pin 27 on IC
> 51. THe connection had to be made.
> I connected IC63 pin 14 to ground.
> All the soldering is fine!
I believe there is nothing wrong with this part, I can check it thought
later tonight.
> When the computer starts everything goes OK. The MSX logo scrolls up
> and then it resets! Under the logo "KL91:128k" is displayed.
> I think this should be "Video 128K"
It's modified ROM by Kari Lammassaari, made in 1991, so it's ok :).
I think that those files in Nyyrikki's page are corrupted. I should
have corrected files somewhere at home... I got them from Kari
last year when I had same problem.
> Can some one help? Why does the msx reset?
>
> A possibility is faulty eproms / rom files from NYYRIKKI.
> I loaded the roms in fmsx 1.6 to see if they were OK. It also
> displayed "KL91:128k" But the emulator worked!
Greetings: Saku Taipale, [EMAIL PROTECTED]
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
