Are you sure this has worked with RuMSX? On a real MSX this direct access is no problem. But on RuMSX i doubt if you can access the real parallel port this way.
And RuMSx is already better than other emu's, it does printer emulation. But there is a software layer in between, i use it sometimes to capture printer output to a PC file. Not all MSX software can print on RuMSX , i guess 'dirty' access to the printer port is not possible. ----- Original Message ----- From: "Cor Wessels" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, December 29, 2001 22:18 Subject: parallel port > Hello, > > I want to sent some data to the parallel port and give a pulse on one (or > two) of the other pins but can't figure out any more how it works. I had it > working several years ago but lost the source. > I have connected a test PCB with a resistor and LED connected to ground on > the parallel port, but when I sent some data with OUT &H91,A (I also tested > it with call &HA8) RuMSX freezes. > > Is there someone who can help me out? > > Greetings Cor > > -- > For info, see http://www.stack.nl/~wynke/MSX/listinfo.html > -- For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
