No it had worked on a real MSX computer. Because I've no real MSX anymore, I tried to do it with RuMSX.
Maybe I shall buy a real MSX again and try than if it will work. But it could also be something else what I do wrong. Such as an input which is now connected to ground which has be connected to +5V. ----- Original Message ----- From: Hans Otten <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, December 29, 2001 11:11 PM Subject: Re: parallel port > Are you sure this has worked with RuMSX? > > On a real MSX this direct access is no problem. But on RuMSX i doubt if you > can access the real parallel port this way. > > And RuMSx is already better than other emu's, it does printer emulation. > But there is a software layer in between, i use it sometimes to capture > printer output to a PC file. > Not all MSX software can print on RuMSX , i guess 'dirty' access to the > printer port is not possible. -- For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
