Yes, I had given /dev/ttyUSB1. I also verified the setup with gnome-pilot, which is currently working.
Also, I verified the permissions on those device files. They seem to be ok. [EMAIL PROTECTED]:~/cvs/beagle/beagle-cvs/beagled> ls /dev/ttyUSB* -lh crw-rw-rw- 1 root uucp 188, 0 2005-03-20 01:06 /dev/ttyUSB0 crw-rw-rw- 1 root uucp 188, 1 2005-06-08 21:19 /dev/ttyUSB1 crw-rw-rw- 1 root uucp 188, 2 2005-03-20 01:06 /dev/ttyUSB2 crw-rw-rw- 1 root uucp 188, 3 2005-03-20 01:06 /dev/ttyUSB3 [EMAIL PROTECTED]:~/cvs/beagle/beagle-cvs/beagled> The following is the content of my ~/.multisync/5/remotesettings <?xml version="1.0"?> <config><username>varadhan</username><id>1000</id><debuglevel>4</debuglevel><type>1</type><speed>57600</speed><timeout>10</t\imeout><sockaddr>/dev/ttyUSB1</sockaddr><popup>0</popup><mismatch>1</mismatch><codepage>cp1252</codepage></config> Hope this will help in providing pointers to solve my issue. Thanks again, V. Varadhan On Wed, 2005-06-08 at 19:54 +0200, Armin Bauer wrote: > Did you check that you entered the correct devices (/dev) path? > > Veerapuram Varadhan wrote: > > Hi, > > > > Recently I started configuring Multisync for syncing my evolution data > > to pilots. > > > > I have been using gnome-pilot so long and it is working fine. However, > > with Multisync, I get "Unable to bind to pilot" message whenever I try > > to sync my evolution data with pilot. > > > > I am using Handspring Visor (USB). I have also stopped gnome-pilot > > daemon as well. > > > > Can anyone give me pointers to solve this issue? > > > > The following is the multisync-debug log. > > > > ------------------- debug log starts ------------------ > > plugin_API_version > > short_name > > long_name > > plugin_init > > always_connected > > [evo2-sync] DEBUG: start: sync_connect > > [evo2-sync] INFORMATION: Loading state from > > file /home/varadhan/.multisync/5/localsettings > > [evo2-sync] DEBUG: end: load_palm_state > > [evo2-sync] DEBUG: end: sync_connect > > sync_disconnect > > [evo2-sync] INFORMATION: start: disconnect > > object_types > > plugin_info > > object_types > > [remote] DEBUG: end: load_palm_state > > [evo2-sync] INFORMATION: Loading state from > > file /home/varadhan/.multisync/5/localsettings > > [evo2-sync] DEBUG: end: load_palm_state > > always_connected > > [evo2-sync] DEBUG: start: sync_connect > > [evo2-sync] INFORMATION: Loading state from > > file /home/varadhan/.multisync/5/localsettings > > [evo2-sync] DEBUG: end: load_palm_state > > [evo2-sync] DEBUG: end: sync_connect > > [remote] DEBUG: end: load_palm_state > > Loading statefile /home/varadhan/.multisync/5/remotesettings > > [remote] INFORMATION: setting PILOTRATE=57600 > > [remote] ERROR: Unable to bind to pilot > > > > -------------- end of debug log---------------- > > > > TIA, > > > > V. Varadhan > > > > > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by: NEC IT Guy Games. How far can you > > shotput > > a projector? How fast can you ride your desk chair down the office luge > > track? > > If you want to score the big prize, get to know the little guy. > > Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20 > > _______________________________________________ > > Multisync-devel mailing list > > Multisync-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/multisync-devel ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20 _______________________________________________ Multisync-devel mailing list Multisync-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/multisync-devel
