Tom, Thanks for your response. When I set the SFTP port to 22, I get the following message in the MultiSync log:
Tue Nov 11 14:40:05 2003 Failed to connect remote: Failed to load data from device 192.168.129.201. (repeated 19 times) In other words, I fail to make a connection. Is there some parameter I have to set in /etc/services or some such file on the Z to make it work (currently, ssh is associated with port 22, while sftp is associated with port 115)? Joakim On Tue, 2003-11-11 at 14:30, Tom Foottit wrote: > You need to set the SFTP port to 22. Setting it to blank (it actually > ends up as 0) gets you transfer in one direction but not the other. The > CVS version of Multisync actually doesn't allow you to set a blank port. > > Also, if you make a change in the Z PIM applications you have to sync > manually or wait for multisync to reach its next sync interval - it > can't detect that the changes were made automatically. > > Let me know if that helps. > > Tom > > > On Tue, 2003-11-11 at 14:35, Joakim Kalvenes wrote: > > I have installed Evolution 1.4.5 on my desktop running Mandrake Linux > > 9.1. I have also installed MultiSync 0.80 and configured the > > synchronization pair as follows: > > > > First Plugin: Ximian Evolution (no changes to default options) > > Second Plugin: Opie and Zaurus (Options - Type: Opie/OpenZaurus, > > Protocol: SFTP, IP Address: 192.168.129.201, Port: <blank>; valid user > > name and password) > > > > The Sharp Zaurus SL-5500 PDA is running OpenZaurus 3.2 with default PIM > > applications (Opie). I have an SD card holding most applications and > > data. I followed the OZ installation instructions and placed the PIM > > application data in > > /mnt/card/root/Applications/<addressbook,datebook,todolist>, where each > > of the three directories contains the corresponding .xml file. There is > > a symlink from /root/Applications to /mnt/card/root/Applications > > > > I have established an SFTP connection and transferred .ipk files from my > > desktop to the Z and, subsequently, installed them on the Z. I feel > > fairly confident that the networking part is operational. > > > > The MultiSync Status line shows: Waiting for change. > > > > The MultiSync log shows the following line: > > > > Tue Nov 11 13:19:46 2003 Synchronization of 4 entries succeeded. > > (repeated 2 times) > > > > However, no data exchange takes place during the synchronization > > (entries in Evolution do not appear in the Z PIM and vice versa). If I > > make a change in the Z PIM applications, nothing registers in MultiSync. > > But, if I add an entry to the Evolution Calendar, MultiSync detects it > > and performs the synchronization (again, without any data exchange). > > > > Apparently, there is something I have not configured correctly with > > respect to the Z. Any help would be appreciated. > > > > Joakim > > > > > > > > ------------------------------------------------------- > > This SF.Net email sponsored by: ApacheCon 2003, > > 16-19 November in Las Vegas. Learn firsthand the latest > > developments in Apache, PHP, Perl, XML, Java, MySQL, > > WebDAV, and more! http://www.apachecon.com/ > > _______________________________________________ > > Multisync-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/multisync-users ------------------------------------------------------- This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/ _______________________________________________ Multisync-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/multisync-users
