Hey, I'am now trying to get my new sx1 working together with gnubox V 1.0. (The connection between the phone and linux via bluetooth works fine) I used the version from leonards sx1 part of the howto: http://www.cs.helsinki.fi/u/mraento/symbian/gnubox.SIS Another SX1 user reported this version works together with his mobile (he has SVN 11) http://www.unix-ag.uni-kl.de/~leonard/gnubox6600.SIS does not starts on my phone.
I have the firmware SVN 13 (SX1_o2-D-MUSIC-uk-de-tr_13_0002). This is a special O2 branded version (SX1 - O2 Music) I created the new "Bt" Access-Point with an arbitray telephone number and gsm-data etc as described in the docs. But after running gnubox the phonenumber is still visible in the AP-Settings of the phone. It shouldn't. (Gnubox shows the correct phone number after starting) If I use putty with the Bt profile to connect to my linux box, sometimes the phone dials the number from the Bt Access-Point and sometimes gives me an error Message (-1). I never get a connection ... Can someone give me a hint? This would be very nice. Best regards, Thomas. Here is a part of the log from gnubox: 22.01.2005 14.20.02 CGnuboxContainer::Draw^M 22.01.2005 14.20.07 CGnuboxContainer::Draw^M 22.01.2005 14.20.10 **** CGnuboxContainer::UpdateCommDbL ****^M 22.01.2005 14.20.11 CGnuboxContainer::SelectBluetoothDevice^M 22.01.2005 14.20.13 Failed to select BT^M 22.01.2005 14.20.13 Updated CommDB^M 22.01.2005 14.20.13 CGnuboxContainer::Draw^M 22.01.2005 14.20.17 **** CGnuboxContainer::UpdateCommDbL ****^M 22.01.2005 14.20.17 CGnuboxContainer::SelectBluetoothDevice^M 22.01.2005 14.20.20 BTCOMM CSY Configured.^M 22.01.2005 14.20.21 Updating ISP^M 22.01.2005 14.20.21 Updating modem^M 22.01.2005 14.20.21 Updated CommDB^M 22.01.2005 14.20.21 CGnuboxContainer::SetScreenTextL^M 22.01.2005 14.20.21 CGnuboxAOLoader::Fire - invoke the one shot active object^M 22.01.2005 14.20.21 CGnuboxContainer::Draw^M 22.01.2005 14.20.21 CGnuboxAOLoader::RunL - start loading CommDB^M 22.01.2005 14.20.21 **** CGnuboxContainer::LoadCommDbSettingsL ****^M 22.01.2005 14.20.21 ==== CGnuboxDocument::StoreRecordL Mode 3 ==== .^M 22.01.2005 14.20.21 CGnuboxContainer::Draw^M 22.01.2005 14.20.28 CGnuboxContainer::~CGnuboxContainer^M 22.01.2005 14.20.35 **** CGnuboxDocument::NewL() ****^M 22.01.2005 14.20.35 **** CGnuboxDocument::ConstructL ****^M 22.01.2005 14.20.35 ==== CGnuboxDocument::RetrieveRecordL Mode ==== .^M 22.01.2005 14.20.35 CGnuboxContainer::ConstructL^M 22.01.2005 14.20.35 CGnuboxContainer::SetScreenTextL^M 22.01.2005 14.20.35 CGnuboxAOLoader::Fire - invoke the one shot active object^M 22.01.2005 14.20.35 CGnuboxContainer::SizeChanged^M 22.01.2005 14.20.35 CGnuboxContainer::Draw^M 22.01.2005 14.20.35 CGnuboxAOLoader::RunL - start loading CommDB^M 22.01.2005 14.20.35 **** CGnuboxContainer::LoadCommDbSettingsL ****^M 22.01.2005 14.20.35 ==== CGnuboxDocument::StoreRecordL Mode 3 ==== .^M 22.01.2005 14.20.36 CGnuboxContainer::Draw^M 22.01.2005 14.20.37 CGnuboxContainer::~CGnuboxContainer^M The ppp connection between linux and the phone works well and i can ping my phone. Jan 22 14:41:29 localhost dund[3091]: New connection from 00:01:VV:3C:VV:4D Jan 22 14:41:30 localhost pppd[3092]: pppd 2.4.2 started by , uid 0 Jan 22 14:41:30 localhost pppd[3092]: Using interface ppp0 Jan 22 14:41:30 localhost pppd[3092]: Connect: ppp0 <--> /dev/rfcomm0 Jan 22 14:41:36 localhost pppd[3092]: Cannot determine ethernet address for proxy ARP Jan 22 14:41:36 localhost pppd[3092]: local IP address 192.168.1.1 Jan 22 14:41:36 localhost pppd[3092]: remote IP address 192.168.3.1 Jan 22 14:41:39 localhost kernel: device ppp0 entered promiscuous mode Jan 22 14:56:18 localhost pppd[3092]: Terminating on signal 2. Jan 22 14:56:18 localhost kernel: device ppp0 left promiscuous mode Jan 22 14:56:24 localhost pppd[3092]: Connection terminated. Jan 22 14:56:24 localhost pppd[3092]: Connect time 14.8 minutes. Jan 22 14:56:24 localhost pppd[3092]: Sent 960 bytes, received 950 bytes. Jan 22 14:56:24 localhost pppd[3092]: Hangup (SIGHUP) Jan 22 14:56:24 localhost pppd[3092]: Exit. -- Sparen beginnt mit GMX DSL: http://www.gmx.net/de/go/dsl ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Multisync-users mailing list Multisync-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/multisync-users
