Likely you don't have the files created on the Opie side yet. I would suggest you create a test appointment and contact on the Opie side to initialize the files. Also make sure you have upgraded your Opie with the latest updates. You may also need to install sqlite3 on your Opie install.
Those are all the problems I ran into when I did this -- good luck. Norm On Sat, 2005-03-12 at 06:19 -0400, Dave Smith wrote: > I am using FC3 with Evolution 2.0.2. I have just downloaded and > installed Opie onto my Zaurus SL-5600. That part has worked OK but > syncing is a problem. > > I have Multi-sync 0.82 installed but although it says it is running > there is clearly no synchronisation taking place. The log gives no > indication of any activity. I set up each end of the sync process by > using "new" with Evo 2 at one end and Opie/Zaurus at the other. > > Are there any other plug-ins that I need to install? If so, where do I > get them for Evo 2 and Opie. > > Thanks > > Dave > > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > Multisync-users mailing list > Multisync-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/multisync-users ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Multisync-users mailing list Multisync-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/multisync-users
