Hi,
Karsten: I have read your previous posting concerning this issue before
I posted my request, but may be you can give me some hints how I can
verify what has happened to the card.
> No, logs. This error is card internal. You have no possibility to see it
> from the host side. A look in the ISO 7816-4 says: Class not supported.
> This should not happen with a MuscleCard with the Card Edge Applet.
Is it possible to read some kind of checkSum to verify if the right
applet is there ?
>
> Possible Problems
>
> 1.) You are not using a card with the Card Edge Applet.
I used CFlexLoader from Martin, to load the applet to the card. The Name
of the file is CardEdge.bin. I thought that this is the CardEdge Applet.
Am I wrong ? How can I check this ?
> 2.) You are talking to a wrong applet which has also AID a0 00 00 00 01
How can I check this ? I only tried to load something onto the card with
the CFlexLoader.
> 01. Have you installed an applet on your card with the saem AID?
I tried several Times to load the CardEdge bin file to the card. Is this
a Problem ??
Ciao
Matze
--
/*
Dipl.-Inform.
Matthias Barmeier WWW: www.sourcepark.de
SourcePark GmbH e-mail: [EMAIL PROTECTED]
Helmholtzstr. 2-9 Geb.6 Tel: +49 (0)30 39 80 68 38
10587 Berlin Fax: +49 (0)30 39 80 68 39
*/
_______________________________________________
Muscle mailing list
[email protected]
http://lists.drizzle.com/mailman/listinfo/muscle
