Sergio, The log file is too large. I copied it to http://www.mvpmc.org/~mdrons/local6.log.gz
-Mike --- Michael Drons <[EMAIL PROTECTED]> wrote: > Date: Mon, 20 Nov 2006 17:58:20 -0800 (PST) > From: Michael Drons <[EMAIL PROTECTED]> > Subject: Re: [Mvpmc-users] 0.3.1 Live TV works... > sort of? > To: John Doe <[EMAIL PROTECTED]>, > [EMAIL PROTECTED], > [email protected] > > Sergio, > > The log file is attached. So event thread was > started with pid 107. When I telnet to the mvpmc I > assumed you wanted to know if there was a process > with > pid 107. The answer was yes. Also, it seemed to > work. I brought up live tv and then changed > channels. It did begin playing video again, I assume > that it was for the new channel. Before it would > just > hang and the screen would stay black. Now video is > played. After it played for a minute I hit the go > button and was going to change to another channel, > but > as I scrolled through the guide, it crashed and > restarted. > > -Mike > > --- John Doe <[EMAIL PROTECTED]> wrote: > > > --------------------------------- > > Matt, Micheal, > > Ok I've uploaded a dongle that shouldn't work when > channels are changed but rather spew lots of > additional debug traces in the now suspect section > of > code. > > Thank you both again for helping me locate this > issue. > > Cheers... > > Sergio > > > > > > --------------------------------- > > From: Matt Mossholder <[EMAIL PROTECTED]> > To: [email protected] > Subject: Re: [Mvpmc-users] 0.3.1 Live TV works... > sort of? > Date: Thu, 16 Nov 2006 17:40:20 -0500 > >Huston, we have a problem.... > > > >On Wed, 2006-11-15 at 19:22 -0500, John Doe wrote: > > > Michael, > > > > > > Thanks for all of your help so far. I put a > debug > dongle at > > > http://www.mvpmc.org/~bugscreen/updates. Once > you've run the trace and > > > before you stop anything please check the trace > for the following > > > line: > > > > > > event thread started (pid <somepid>) > > > > > > telnet to your mvp and run top to see if the > thread exists and if its > > > running. Let me know what you find and send me > the trace. I've > > > disabled two different events from being > processes > so your watch > > > recordings and upcoming recording lists won't > update dynamically but > > > this should eliminate and problems with the > associated event > > > processing. > > > > > > >Ummm.... was this supposed to actually make channel > changing work? It > >does for me.... > > > > > >Here's some log entries... > >============================ > > > > > > > >Wed Nov 15 18:52:27 EST 2006HIDE: 0 len 53 label > 'Parents - Shows' > >HIDE: 1 len 37 label 'Parents - Movies' > >HIDE: 2 len 20 label 'Kids - Shows' > >HIDE: 3 len 7 label 'LiveTV' > >loaded config file > >child exited cleanly > >child pid 89 > >MediaMVP Media Center > >Version 4c2cdde7866130da44523e9418fc67aa80869480 > with > 45 local > >changesfnt_createfont: /etc/helvB14.pcf,0 not found > >glyph_count = 756 (2f4) > >def char 0 (0) > >size 8960 byte1 0,34 byte2 0,255 > >pcf_createfont: using font /etc/helvB14.pcf > >fnt_createfont: /etc/helvB18.pcf,0 not found > >glyph_count = 756 (2f4) > >def char 0 (0) > >size 8960 byte1 0,34 byte2 0,255 > >pcf_createfont: using font /etc/helvB18.pcf > >fnt_createfont: /etc/helvB14.fnt,0 not found > >pcf_createfont: /etc/helvB14.fnt,0 not found > >createfont: no font found, returning NULL > >createfont: (height == 0) found builtin font System > (0) > >createfont: (height == 0) found builtin font System > (0) > > > >Wed Nov 15 18:52:27 EST 2006NTSC mode, 720x480 > >screen is 720 x 480 > >Initializing PAT Decoder > >audio write thread started (pid 91) > >approximate heap size 692224 > >Allocated 4194304 heap bytes > >Allocated guard page > >mpeg read thread started (pid 92) > >video write thread started (pid 93) > >audio thread started (pid 94) > >Demux size video: 2097152 audio: 524288 > >Setting WSS aspect to: 8 > >*** SSDEBUG: event connection set up, > event:0x105f610c > >mythtv control thread sleeping...(pid 109) > >myth watchdog thread started (pid 110) > >*** SSDEBUG: exiting mythtv_init, event:0x105f610c > >event thread started (pid 111) > >*** SSDEBUG: Waiting for an event, event:0x105f610c > >*** SSDEBUG: waiting for input on event socket, > conn/event: 0x105f610c > >Starting new livetv > >Starting New Live TV! > >*** SSDEBUG: got event string BACKEND_MESSAGE, > conn/event: 0x105f610c > >*** SSDEBUG: Returning event: 2 > >*** SSDEBUG: Event received, event:0x105f610c, > next:2 > >MythTV event RECORDING_LIST_CHANGE > >*** SSDEBUG: recording_list_change complete, > event:0x105f610c*** > >SSDEBUG: Skipped case statement, event:0x105f610c, > next:2 > >*** SSDEBUG: Waiting for an event, event:0x105f610c > >*** SSDEBUG: waiting for input on event socket, > conn/event: 0x105f610c > >*** SSDEBUG: got event string BACKEND_MESSAGE, > conn/event: 0x105f610c > >*** SSDEBUG: Returning event: 6 > >*** SSDEBUG: Event received, event:0x105f610c, > next:6 > >MythTV event LIVETV_CHAIN UPDATE > live-192.168.0.250-2006-11-16T17:24:48 > >recorder framerate is 29.97 > >screensaver enable > >mclient:Starting mclient pthread. > >web server thread started (pid 99) > >expose on unknown wid 2 > >switch_gui_state(): changing from 1 to 2 > >show busy widget > >switch_hw_state(): changing from 1 to 2 > >Changing to aspect 0, afd 0 > >Video aspect reported as ZERO - not changing > setting > >fullscreen video mode > >fullscreen video mode > >*** SSDEBUG: live_tv_chain_update complete, > event:0x105f610c*** SSDEBUG: > >Skipped case statement, event:0x105f610c, next:6 > >*** SSDEBUG: Waiting for an event, event:0x105f610c > >*** SSDEBUG: waiting for input on event socket, > conn/event: 0x105f610c > >Got stream recorder = 0x10604e1c, file = (nil)) > >mythtv control thread starting...(pid 109) > >audio write thread running > >video write thread running > >screensaver enable > >screensaver disable > >screensaver enable > >screensaver disable > >control_start(): starting rec playback > >auto detection transport stream returned 0 > >Changing to aspect 2, afd -1 > >Source video aspect ratio: 4:3 > >Setting WSS aspect to: 8 > >selected audio stream 0xc0 > >switch to MPEG audio output device > >hide busy widget > >screensaver disable > >show busy widget > >video write thread sleeping... > >audio write thread sleeping... > >Freeing PAT Decoder > >Initializing PAT Decoder > >mpeg read thread sleeping... > >Freeing PAT Decoder > >Initializing PAT Decoder > >Setting WSS aspect to: 8 > >*** SSDEBUG: got event string BACKEND_MESSAGE, > conn/event: 0x105f610c > >*** SSDEBUG: Returning event: 6 > >*** SSDEBUG: Event received, event:0x105f610c, > next:6 > >MythTV event LIVETV_CHAIN UPDATE > live-192.168.0.250-2006-11-16T17:24:48 > >Changing to aspect 2, afd -1 > >Source video aspect ratio: 4:3 > >Setting WSS aspect to: 8 > >*** SSDEBUG: live_tv_chain_update complete, > event:0x105f610c*** SSDEBUG: > >Skipped case statement, event:0x105f610c, next:6 > >*** SSDEBUG: Waiting for an event, event:0x105f610c > >*** SSDEBUG: waiting for input on event socket, > conn/event: 0x105f610c > >*** SSDEBUG: got event string BACKEND_MESSAGE, > conn/event: 0x105f610c > >*** SSDEBUG: Returning event: 2 > >*** SSDEBUG: Event received, event:0x105f610c, > next:2 > >MythTV event RECORDING_LIST_CHANGE > >*** SSDEBUG: recording_list_change complete, > event:0x105f610c*** > >SSDEBUG: Skipped case statement, event:0x105f610c, > next:2 > >*** SSDEBUG: Waiting for an event, event:0x105f610c > >*** SSDEBUG: waiting for input on event socket, > conn/event: 0x105f610c > >*** SSDEBUG: got event string BACKEND_MESSAGE, > conn/event: 0x105f610c > >*** SSDEBUG: Returning event: 6 > >*** SSDEBUG: Event received, event:0x105f610c, > next:6 > >MythTV event LIVETV_CHAIN UPDATE > live-192.168.0.250-2006-11-16T17:24:48 > >*** SSDEBUG: live_tv_chain_update complete, > event:0x105f610c*** SSDEBUG: > >Skipped case statement, event:0x105f610c, next:6 > >*** SSDEBUG: Waiting for an event, event:0x105f610c > >*** SSDEBUG: waiting for input on event socket, > conn/event: 0x105f610c > >*** SSDEBUG: got event string BACKEND_MESSAGE, > conn/event: 0x105f610c > >*** SSDEBUG: Returning event: 6 > >*** SSDEBUG: Event received, event:0x105f610c, > next:6 > >MythTV event LIVETV_CHAIN UPDATE > live-192.168.0.250-2006-11-16T17:24:48 > >*** SSDEBUG: live_tv_chain_update complete, > event:0x105f610c*** SSDEBUG: > >Skipped case statement, event:0x105f610c, next:6 > >*** SSDEBUG: Waiting for an event, event:0x105f610c > >*** SSDEBUG: waiting for input on event socket, > conn/event: 0x105f610c > >*** SSDEBUG: got event string BACKEND_MESSAGE, > conn/event: 0x105f610c > >*** SSDEBUG: Returning event: 6 > >*** SSDEBUG: Event received, event:0x105f610c, > next:6 > >MythTV event LIVETV_CHAIN UPDATE > live-192.168.0.250-2006-11-16T17:24:48 > >*** SSDEBUG: live_tv_chain_update complete, > event:0x105f610c*** SSDEBUG: > >Skipped case statement, event:0x105f610c, next:6 > >*** SSDEBUG: Waiting for an event, event:0x105f610c > >*** SSDEBUG: waiting for input on event socket, > conn/event: 0x105f610c > >video write thread running > >audio write thread running > > > > > > > >========================================= > > > > > > > Just out of curiosity, I've also uploaed a > dongle > compiled with the > > > new kernel with no debugging traces at all. If > you > have the time, > > > could you give that one a try as well? It will > have a -2.4.31 rather > > > than the -2.4.17 at the end. > > > > > > >This one doesn't seem to want to boot right for > me... > it downloads the > >dongle, but never gets past the black screen after > the initial blue > >screen. Telnet never fires up, either. > > > > > > > Thanks again. > > > > > > Cheers... > > > > > > Sergio > > > > > > > Thanks! > > > > --Matt > > > > > > > > > >------------------------------------------------------------------------- > >Take Surveys. Earn Cash. Influence the Future of IT > >Join SourceForge.net's Techsay panel and you'll get > the chance to share your > >opinions on IT & business topics through brief > surveys - and earn cash > >http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > >_______________________________________________ > >Mvpmc-users mailing list > >[email protected] > >https://lists.sourceforge.net/lists/listinfo/mvpmc-users > >mvpmc wiki: http://mvpmc.wikispaces.com/ > > > > --------------------------------- > Buy, Load, Play. The new Sympatico / MSN Music Store > works seamlessly with Windows Media Player. Just > Click > PLAY. > > ------------------------------------------------------------------------- > > Take Surveys. Earn Cash. Influence the Future of > IT > > Join SourceForge.net's Techsay panel and you'll > get > > the chance to share your > > opinions on IT & business topics through brief > > surveys - and earn cash > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV> > _______________________________________________ > > Mvpmc-users mailing list > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/mvpmc-users > > mvpmc wiki: http://mvpmc.wikispaces.com/ > > > > > > ____________________________________________________________________________________ > Sponsored Link > > Mortgage rates near 39yr lows. > $310k for $999/mo. Calculate new payment! > www.LowerMyBills.com/lre ____________________________________________________________________________________ Sponsored Link Mortgage rates near 39yr lows. $420k for $1,399/mo. Calculate new payment! www.LowerMyBills.com/lre
local6_2.4.17.gz
Description: pat657837606
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ Mvpmc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mvpmc-users mvpmc wiki: http://mvpmc.wikispaces.com/
