My hvr 1300 doesn't seem to work no matter what I do. The symptoms are the same for all 2.6.37.x kernels; the cards IS recognized - dmesg | grep cx88; cx88_audio 0000:01:07.1: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18 cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,insmod option], frontend(s): 1 cx88[0]: TV tuner type 41, Radio tuner type -1 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner cx88/0: cx2388x v4l2 driver version 0.0.8 loaded tuner 1-0043: chip found @ 0x86 (cx88[0]) tuner 1-0061: chip found @ 0xc2 (cx88[0]) cx88[0]: hauppauge eeprom: model=96019 cx88[0]/1: CX88x/0: ALSA support for cx2388x boards cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:01:07.2: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18 cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 18, latency: 64, mmio: 0xdb000000 cx8800 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18 cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 18, latency: 64, mmio: 0xdd000000 wm8775 1-001b: chip found @ 0x36 (cx88[0]) cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx88/2: cx2388x dvb driver version 0.0.8 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] cx88[0]/2: cx2388x based DVB/ATSC card cx8802_alloc_frontends() allocating 1 frontend(s) DVB: registering new adapter (cx88[0]) cx88/2: registering cx8802 driver, type: blackbird access: shared cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design) cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted cx88[0]/2-bb: Firmware upload successful. cx88[0]/2-bb: Firmware version is 0x02060039 cx88[0]/2: registered device video1 [mpeg]
All the modules seem to load - lsmod | grep cx88; cx88_blackbird 13254 1 cx2341x 15408 1 cx88_blackbird cx88_dvb 19559 1 cx88_vp3054_i2c 1520 1 cx88_dvb videobuf_dvb 3938 1 cx88_dvb dvb_core 75727 3 cx88_dvb,videobuf_dvb cx8800 24226 1 cx88_blackbird cx8802 11179 2 cx88_blackbird,cx88_dvb cx88_alsa 6991 0 cx88xx 66327 5 cx88_blackbird,cx88_dvb,cx8800,cx8802,cx88_alsa v4l2_common 5844 6 cx88_blackbird,cx2341x,wm8775,cx8800,tuner,cx88xx videodev 57747 8 cx88_blackbird,cx2341x,wm8775,cx8800,tuner,cx88xx,v4l2_common i2c_algo_bit 4191 2 cx88_vp3054_i2c,cx88xx videobuf_dma_sg 7224 6 cx88_blackbird,cx88_dvb,cx8800,cx8802,cx88_alsa,cx88xx videobuf_core 13399 6 cx88_blackbird,videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg ir_common 3506 1 cx88xx ir_core 12818 8 ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,cx88xx,ir_common tveeprom 10577 1 cx88xx btcx_risc 2799 4 cx8800,cx8802,cx88_alsa,cx88xx snd_pcm 59496 5 snd_hda_codec_hdmi,cx88_alsa,snd_hda_intel,snd_hda_codec snd 43987 13 snd_hda_codec_hdmi,snd_hda_codec_via,snd_seq_oss,snd_seq,snd_seq_device,cx88_alsa,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer i2c_core 16029 16 cx22702,cx88_dvb,cx88_vp3054_i2c,wm8775,tuner_simple,tda9887,tda8290,cx8800,tuner,cx88xx,v4l2_common,videodev,i2c_algo_bit,tveeprom,nvidia,i2c_nforce2 I've also tried different module options amongst oithers different tuners like; option cx88xx card=56 tuner=63 (1,3,5,7,41,43 ...) No logs in /var/log shows anything suspicious. If I start scan, me-tv or Kaffeine nothing happens, and nothing in the logs. All three ends up as dead processes and can't even be killed properly. Furthermore I have tried dvb/v4l from git and also compiling my own kernel. I have also applied the small hack to the cx88-dvb.c file in the source for my particular card as described above. Nothing works so far. The card use to work under earlier kernels up to 2.6.33 on Ubuntu. Where to go now? -- You received this bug notification because you are a member of Mythbuntu Bug Team, which is subscribed to Mythbuntu. https://bugs.launchpad.net/bugs/439163 Title: HVR-1300 HVR-3000 HVR-4000 broken in kernel Status in Mythbuntu, Ubuntu derivative focused upon MythTV: Triaged Status in MythTV: Invalid Status in “linux” package in Ubuntu: Triaged Status in Debian GNU/Linux: New Bug description: This is a continuation of bug #436564. Please refer to that for relevant dmesg'. The capture card I have is the Hauppauge HVR-1300. The card is now correctly recognized as DVB-T but channel scan fails with message "Timed out, no signal" at each channel is scanned. The command scan <location> > channels.conf ends correcly and file channels.conf is feeded with all tunable channels. I tried to import such channels.conf with the same result. Increasing the signal and channel timeout in the DVB settings (now up to 1000 but I planned to increase to ignore) doesnt solve the problem. Tonight I will try what Marc suggested - mythtv-setup --verbose channelscan,siparser,channel,record - then I will report the log. _______________________________________________ Mailing list: https://launchpad.net/~mythbuntu-bugs Post to : [email protected] Unsubscribe : https://launchpad.net/~mythbuntu-bugs More help : https://help.launchpad.net/ListHelp
