Hello!
It works for me in Ubuntu 10.10 kernel 2.6.35-28 generic with a Hauppage
HVR4000:
1. Downloading v4l source of comment #150
hg clone http://linuxtv.org/hg/v4l-dvb
2. Edit the file: v4l-dvb/linux/drivers/media/video/cx88/cx88-dvb.c
And commenting out the five lines:
case CX88_BOARD_HAUPPAUGE_HVR4000:
/* Toggle reset on cx22702 leaving i2c active */
cx_set(MO_GP0_IO, 0x00000080);
//udelay(1000);
//cx_clear(MO_GP0_IO, 0x00000080);
//udelay(50);
//cx_set(MO_GP0_IO, 0x00000080);
//udelay(1000);
3. As comment #150 says, it was necessary to remove FireDTV modules.
Before, I ned to install libncurses & libncurses5 (I used synaptics to do
it). Then, I entered menuconfig:
make menuconfig
and unmarking with (N) the module "FireDTV and FloppyDTV"
you can find it under Multimedia Support --> DVB/ATSC adapters
4. Compiling and installing the driver:
make
sudo make install
It works fine in MythTV but I have some problems in Mythbox pluggin under XBMC.
I can watch the first channel selected, but if I select a second channel, XBMC
hangs. I don't know if the error is related to this driver.
I tried to do the same in Mythbuntu 11.04 kernel 2.6.38-8, but I obtained a lot
of errors related to IOCTL when tried to compile.
--
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to MythTV.
https://bugs.launchpad.net/bugs/439163
Title:
HVR-1300 HVR-3000 HVR-4000 broken in kernel
Status in Mythbuntu, Ubuntu derivative focused upon MythTV:
Triaged
Status in MythTV:
Invalid
Status in “linux” package in Ubuntu:
Triaged
Status in Debian GNU/Linux:
New
Bug description:
This is a continuation of bug #436564. Please refer to that for relevant
dmesg'.
The capture card I have is the Hauppauge HVR-1300.
The card is now correctly recognized as DVB-T but channel scan fails with
message "Timed out, no signal" at each channel is scanned.
The command scan <location> > channels.conf ends correcly and file
channels.conf is feeded with all tunable channels.
I tried to import such channels.conf with the same result.
Increasing the signal and channel timeout in the DVB settings (now up to 1000
but I planned to increase to ignore) doesnt solve the problem.
Tonight I will try what Marc suggested - mythtv-setup --verbose
channelscan,siparser,channel,record - then I will report the log.
_______________________________________________
Mailing list: https://launchpad.net/~mythbuntu-bugs
Post to : [email protected]
Unsubscribe : https://launchpad.net/~mythbuntu-bugs
More help : https://help.launchpad.net/ListHelp
