On Dec 8, 2005, at 8:34 AM, Steve Adeff wrote:
Sent this to the user list with no response, so I assume its not
possible.
-----
ok, DCT6200, with 5C on many channels, os some channels can be
received
through the firewire no problem, the rest can use the pvr-150.
Is there a way to set it up so that when Myth needs to record a
5C=0 channel
it uses the firewire transfer from the box but when it needs to
record a
5C=1+ it uses the PVR-150? I can manually tell Myth which channels use
firewire and which use the PVR-150 but what I need to know is if
there is a
way to tell it that both methods are using the same cable box and
therefore
it can't use both simultaneously?
------
Since many people will have a similar setup with their cable box (some
channels 5C=0 some 5C=1, a nice ability would be to be able to have
Myth take
some channels via firewire and some via a PVR-150 from the same
cable box.
I don't see a way to do this, as the scheduler would need to know
that it couldn't run both sources at the same time.
Keith
_______________________________________________
mythtv-dev mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
