On Thursday 08 December 2005 10:55, Keith C wrote: > On Dec 8, 2005, at 8:34 AM, Steve Adeff wrote: > > Sent this to the user list with no response, so I assume its not > > possible. > > ----- > > ok, DCT6200, with 5C on many channels, os some channels can be > > received > > through the firewire no problem, the rest can use the pvr-150. > > > > Is there a way to set it up so that when Myth needs to record a > > 5C=0 channel > > it uses the firewire transfer from the box but when it needs to > > record a > > 5C=1+ it uses the PVR-150? I can manually tell Myth which channels use > > firewire and which use the PVR-150 but what I need to know is if > > there is a > > way to tell it that both methods are using the same cable box and > > therefore > > it can't use both simultaneously? > > ------ > > > > Since many people will have a similar setup with their cable box (some > > channels 5C=0 some 5C=1, a nice ability would be to be able to have > > Myth take > > some channels via firewire and some via a PVR-150 from the same > > cable box. > > I don't see a way to do this, as the scheduler would need to know > that it couldn't run both sources at the same time. > > Keith
something that could be added? This is a situation that many people with the DCT boxes could take advantage of. -- Steve _______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
