David Bosiljevac wrote:
Hi all,
I've tried everything I can, but I just can't seem to get lirc to work for me.
I do all the kernel compilations, with all the required modules, but when I run the /usr/local/bin/irw program, nothing shows up when I press buttons on the remote.
I've checked to make sure the IR cable is plugged into my Hauppauge card. I've changed batteries on my remote. Still nothing.
Here's the lirc entries from my /var/log/messages file:
Dec 18 23:44:22 localhost kernel: lirc_dev: IR Remote Control driver registered, at major 61 Dec 18 23:44:22 localhost kernel: bttv: driver version 0.7.108 loaded Dec 18 23:44:22 localhost kernel: bttv: using 4 buffers with 2080k (8320k total) for capture Dec 18 23:44:22 localhost kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) Dec 18 23:44:22 localhost kernel: lirc_dev: lirc_register_plugin:sample_rate: 10
My lircd logfile is showing the line:
Dec 18 23:46:21 krusty lircd 0.7.0: accepted new client on /dev/lircd
There doesn't seem to be any errors anywhere.
Am I missing something? Does anybody have any thoughts as to why I get nothing when I run irw?
Thanks in advance.
--db
___
Do you have the correct /etc/lircd.conf file for your remote? When I can successfully connect with irw, meaning that it doesn't return to command prompt on launching and my kernel shows it accepting a new client, but get nothing from button presses, that means I used the wrong config file. You prolly have to restart lircd after updating the config file.
_______________________________________________
mythtv-users mailing list
[EMAIL PROTECTED]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
