I'm running KnoppMyth R4V5, and can't get even a twitch from the remote. I can see it is emitting IR using my camcorder. I can occasionally get output by using 'hexdump /dev/lirc' and pressing remote buttons repeatedly. Can't get irw to print anything, just sits there. Ran lircmd, no response to the remote in X. I have the grey Hauppauge! remote. The number buttons are at the bottom, as are the colored buttons.

I'm about to jump into recompiling lirc, but not sure if that will help. Any suggestions are greatly appreciated!

Regards,
  JJ

HP Pavilion 6735 (PIII Celeron Coppermine 600MHz), 256MB RAM, 60GB HD
KnoppMyth R4V5
Hauppauge PVR-250
VisionTek ATI Radeon 7000 using S-Video out to a TV
LinkSys LNE-100TX

[EMAIL PROTECTED]:/home/john# lircd -v
lircd 0.7.0pre4

[EMAIL PROTECTED]:/home/john# lircmd -v
lircmd 0.7.0pre4

[EMAIL PROTECTED]:/home/john# ps ax | grep lirc
  617 ?        SW     0:00 [lirc_dev]
  672 ?        S      0:00 /usr/local/sbin/lircd
 1316 ttyp1    S      0:00 grep lirc

[EMAIL PROTECTED]:/home/john# lsmod | grep lirc
lirc_i2c 4448 0 (autoclean)
lirc_dev 8592 1 (autoclean) [lirc_i2c]
i2c-core 12452 0 (autoclean) [lirc_i2c ivtv msp3400 saa7115 tuner i2c-algo-bit]


[EMAIL PROTECTED]:/home/john# cat /etc/lircd.conf
# brand:                       Hauppauge
# model no. of remote control: Grey (PVR-350)

begin remote

  name  hauppaugegrey
  bits           13
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  gap          200000
  min_repeat      4
  toggle_bit      2


begin codes OFF 0x00000000000017FD GO 0x0000000000001FFB 1 0x00000000000017C1 2 0x00000000000017C2 3 0x00000000000017C3 4 0x00000000000017C4 5 0x0000000000001FC5 6 0x0000000000001FC6 7 0x0000000000001FC7 8 0x0000000000001FC8 9 0x0000000000001FC9 0 0x00000000000017C0 BACK/EXIT 0x00000000000017DF MENU 0x0000000000001FCD CH+ 0x00000000000017E0 OK 0x00000000000017E5 CH- 0x00000000000017E1 VOL- 0x0000000000001FD1 VOL+ 0x00000000000017D0 RED 0x0000000000001FCB GREEN 0x0000000000001FEE YELLOW 0x00000000000017F8 BLUE 0x0000000000001FE9 MUTE 0x00000000000017CF BLANK 0x0000000000001FCC FULL 0x00000000000017FC REW 0x0000000000001FF2 PLAY 0x00000000000017F5 FFW 0x0000000000001FF4 RECORD 0x00000000000017F7 STOP 0x0000000000001FF6 PAUSE 0x00000000000017F0 REPLAY 0x0000000000001FE4 SKIP 0x00000000000017DE end codes

end remote

[EMAIL PROTECTED]:/usr/src# lspci -v
00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller Hub] (rev 03)
Flags: bus master, fast devsel, latency 0


00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA])
Subsystem: Intel Corp. 82810 CGC [Chipset Graphics Controller]
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 9
Memory at ec000000 (32-bit, prefetchable) [disabled] [size=64M]
Memory at e8000000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: [dc] Power Management version 1


00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e8100000-e81fffff
Prefetchable memory behind bridge: f0000000-fbffffff


00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corp. 82801AA IDE
Flags: bus master, medium devsel, latency 0
I/O ports at 1800 [size=16]


00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp. 82801AA USB
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1820 [size=32]


00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
        Subsystem: Intel Corp. 82801AA SMBus
        Flags: medium devsel, IRQ 9
        I/O ports at 1810 [size=16]

00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02)
Subsystem: Intel Corp.: Unknown device 5643
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at 1200 [size=256]
I/O ports at 1300 [size=64]


01:0b.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
Subsystem: Lite-On Communications Inc LNE100TX
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at 3000 [size=256]
Memory at e8110000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=256K]


01:0d.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: VISIONTEK: Unknown device 0280
Flags: bus master, stepping, medium devsel, latency 66, IRQ 9
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3400 [size=256]
Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] Power Management version 2


01:0e.0 Multimedia video controller: Internext Compression Inc: Unknown device 0016 (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 4009
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2


_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to